SWF LL S151 laser soldering machine comes with controlled wire feed, 100W diode laser and has a wavelength of 980nm ±10nm. Wire and wire slip use monitored via a rotary encoder control wheel. Wire roll holder is aligned so wire roll positions and roll diameters can be set. Work angle can be selected. Controlled wire feed regulates or stops wire feed when it encounters a resistance or impacts with a specific force, and avoids wire kinking by adjusting for component and handling tolerances. Air cooled. Temperature can be controlled in real time. Can preset temp. curve or pure laser power. Includes process camera for setup. Records operating data. For inline and standalone use.
Eutect, www.eutect.de/home.html?L=1
EP17HT-100 is a single-part epoxy designed to cure in 60-90 min. at 200-220°F. Formulated for potting, encapsulation, bonding and sealing applications. Cures can be accelerated at higher temperatures. Is a moderate viscosity compound that can be cast in sections up to a 0.5" thick. Is not premixed and frozen. Reportedly has an unlimited working life at room temp. Offers volume resistivity of >1015 ohm-cm. Bonds well to metals, composites, ceramics, glass and many plastics. Exhibits a tensile lap shear strength exceeding 2,700 psi at ambient temp. after being post-cured for several hours at 350-400°F. Has thermal conductivity of 4-5 BTU·in/(hr·ft²·°F). Service temp. range -100°F to +500°F.
Master Bond, www.masterbond.com
CalcuQuote now reads and shares inventory master data with Manex through an application programming interface. Automatically ties bills of material (BoM) to their corresponding Manex part number, for easy viewing of part description, alternate part suggestions, Manex part number, standard cost, target price, part classification, and more.
VisionPDM, www.calcuquote.com
PF608-PI-21 (SnAg4.0Cu0.5/x) and PF606-P-BS1 (SnAg3.0Cu0.5/x) bumping solder pastes are designed to decrease voids in wafer bumping. Are said to offer excellent stencil printing transfer rates and void rates of <10%.
Shenmao America, www.shenmao.com
XF-784, a 1 mil matte antistatic, barcode tracking label material, is said to enhance print receptivity and the capability to withstand harsh fluxes and cleaning chemistry found in PCB manufacturing. Shows improved performance over the gloss coatings when exposed to a non-reflow environment prior to cleaning. Reduce charge generated on adhesive when label is removed from liner. Provides peel voltages of less than 100V per inch square. Designed to prevent significant charge buildup on the label surface, which can result in a static discharge event. Label surface resistance between 1.0 x 108 and 1.0 x 1011 ohms.
Polyonics, polyonics.com
TR7007QI stop-and-go SPI system is designed for accuracy. Is built on 3D projection technology. Automatically optimizes inspection route. SmartWarp system compensates for board warpage during inspection. Provides the choice of quad/dual projector inspection. Includes shadow-free quad/dual digital fringe projectors and 100% solder paste defect coverage, including low bridges.
Test Research Inc., http://www.tri.com.tw/en/index.html
Press Releases
- TechSearch International Analyzes Hybrid Bonding Developments and Panel Market Growth
- ECD Doubles Manufacturing Footprint to Meet Demand for SmartDRY Intelligent Dry Storage Systems
- RBB Partners with LogiSync to Enhance In-house Design Capabilities
- Indium Corporation to Showcase Precision Gold Solder Solutions at MEDevice Silicon Valley 2024