2K series two-part conformal coatings are fully IPC-CC-830 compliant. 2K100 is a low-stress general purpose coating for an operating temperature range of -40° to +100°C. Is hydrophobic, and resistant to salt mist, condensation and chemicals. 2K300 is hydrophobic and resistant to condensation, salt mist and chemicals, with a thermal performance range of -40° to +130°C.
2K500 is mechanically robust and offers good abrasion resistance along with increased thermal endurance (-40° to +140°C). Provides thermal shock performance.
Electrolube, www.electrolube.com
Series 5002 Silver Zebra connector is for LCD to printed circuit board connections. For board-to-board connections where space is limited. Current carrying capacity up to 300 mA per square 0.040". Contact resistance of less than 500 mΩ. Creates redundant electrical contact through a unique product design that incorporates 240 alternating layers of silver-filled conductive elastomer and nonconductive silicone material per inch of connector. Provides a centerline pitch between layers of 0.004" (0.10mm) and permits 0.015" (0.381mm) pad spacing on the PCB.
Fujipoly America, fujipoly.com
Universal Permalex Holder System no longer has support shim. Holder has been extended to provide more support to blade; enables better printing performance for large area printing operations. Includes spring-loaded clamp bar that extends when loosened. Can be installed on any surface mount technology printer. Includes sliding and floating paste retainers.
Transition Automation, www.transitionautomation.com
Universal flux remover cleans rosin-based, high-temperature, Pb-free materials. Universal contact cleaner is formulated to clean electrical contacts, relays, switches and circuits. Is nonconductive, fast-drying, nonflammable, and reportedly is compatible with many materials. Both use environmentally progressive HFO chemistries. Have low global warming potential and are exempt from volatile organic compound (VOC) restrictions. Polar flux remover cleans heavy, aged fluxes and pastes found in printed circuit board repairs. All three are compliant with current European environmental, health and safety regulations. Are packaged with a low GWP propellant and are REACH, GHS, WEEE and ROHS-compliant.
Microcare, www.microcare.com
Mycronic 4.0 automated intelligent factory software enables visibility planning, material tracking, efficient changeovers, automated replenishment and intelligent storage solutions.
Mycronic, www.mycronic.com
RD500 series rework station has upgraded three-stage heating system said to produce up to 5.6KW (large model) overall thermal output, an increase of 40% over the previous model. Features semiautomated single axis placement and reflow station for BGA/SMT; and advanced control technology, for safe lead-free and eutectic rework. Comes in two models. Handles multilayer PCBs up to 500 x 700mm. Reworks metal shielded, ceramic (CCGA), thermal heat sink devices, plastic column BGAs (PBGA) and 01005 devices. Localized top and bottom hot gas heaters and bottom area array infrared (IR) heating system offers uniform heating throughout the board. Higher magnification – high resolution digital optics provide quick and easy parts placement, accurate to within +/- 0.015mm. New micro-controlled stepper motor-driven automated pick-and-place with feedback control.
Den-On Instruments, www.denondic.co.jp
Press Releases
- Zero Defects International to Exhibit at Silicon Valley Expo and Tech Forum
- TechSearch International Analyzes Hybrid Bonding Developments and Panel Market Growth
- ECD Doubles Manufacturing Footprint to Meet Demand for SmartDRY Intelligent Dry Storage Systems
- RBB Partners with LogiSync to Enhance In-house Design Capabilities