The 5100H Series of vibration-damping optical tables is available in a variety of sizes and configurations, up to 6'x20'x36". Offers a stiff, highly damped surface with high natural frequency (270 Hz), a core shear modulus of 225,000 psi and flatness of ± 0.005". Feature 3/16" ferromagnetic stainless steel top skin, 3/16" carbon steel bottom skin and a proprietary steel honeycomb core design.
Said to exceed the performance levels of competitive models for maximum dynamic deflection and maximum relative motion (IRDmax). Easily customized, legstands are available in two basic designs (modular rigid upgradeable supports or fully configured state-of-the-art systems) and five standard heights, with load capacities ranging from 500 to 2000 lbs. per leg.
Options include special shapes, cutouts and notches as well as a choice of core and skin materials including aluminum, nonmagnetic stainless steel and Invar. Accessories include laser ports, shelves, tabletop enclosures, retractable casters and modular splices for joining tables in "L", "U" and "T" configurations.
Kinetic Systems Inc., www.kineticsystems.com
Said to exceed the performance levels of competitive models for maximum dynamic deflection and maximum relative motion (IRDmax). Easily customized, legstands are available in two basic designs (modular rigid upgradeable supports or fully configured state-of-the-art systems) and five standard heights, with load capacities ranging from 500 to 2000 lbs. per leg.
Options include special shapes, cutouts and notches as well as a choice of core and skin materials including aluminum, nonmagnetic stainless steel and Invar. Accessories include laser ports, shelves, tabletop enclosures, retractable casters and modular splices for joining tables in "L", "U" and "T" configurations.
Kinetic Systems Inc., www.kineticsystems.com
AlphaPREP PC-7030 oxide replacement system produces a highly bondable brown conversion coating on copper innerlayers using horizontal equipment by removing minimal amounts of copper.
Specially formulated for low-etch/high capacity operations, offers up to 60% reduction in consumption and waste treatment. Featuring a low copper etch factor of 0.9 - 1.1u, copper loss from fine lines and thin copper is reduced, improving performance on controlled impedance.
Other benefits include:
Reduction in consumption and waste treatment;
Increased peel strengths on High Tg dielectrics;
Less frequent bath changes with increased up-time;
Improved yields and reliability.
Enthone Inc., www.cooksonelectronics.com
Specially formulated for low-etch/high capacity operations, offers up to 60% reduction in consumption and waste treatment. Featuring a low copper etch factor of 0.9 - 1.1u, copper loss from fine lines and thin copper is reduced, improving performance on controlled impedance.
Other benefits include:
Reduction in consumption and waste treatment;
Increased peel strengths on High Tg dielectrics;
Less frequent bath changes with increased up-time;
Improved yields and reliability.
Enthone Inc., www.cooksonelectronics.com
New control and hardware capabilities are available for the Power Column 2 vertical lift module (VLM).
Hardware capabilities include an increase in vertical travel speed from 29 in./sec. to 55 in./sec.; specialty trays in widths up to 157" (98" standard) and weight capacities up to 1100 lbs (880 lbs standard).
An integrated parts lookup table enables the operator to search for a part number and then have the module automatically retrieve the tray where the part is stored.
Other control modifications include new screen designs on the unit's touch-screen keypad. Additional software control choices are also available.
Rack-and-pinion drive allows pinpoint retrieval of item trays without adjustment. Available in heights from 10 to 50', features options such as a tilt-tray up to 45°, a lift system that adjusts the height of the pick tray and a lockable powered door.
FKI Logistex, www.fkilogistex.com
Hardware capabilities include an increase in vertical travel speed from 29 in./sec. to 55 in./sec.; specialty trays in widths up to 157" (98" standard) and weight capacities up to 1100 lbs (880 lbs standard).
An integrated parts lookup table enables the operator to search for a part number and then have the module automatically retrieve the tray where the part is stored.
Other control modifications include new screen designs on the unit's touch-screen keypad. Additional software control choices are also available.
Rack-and-pinion drive allows pinpoint retrieval of item trays without adjustment. Available in heights from 10 to 50', features options such as a tilt-tray up to 45°, a lift system that adjusts the height of the pick tray and a lockable powered door.
FKI Logistex, www.fkilogistex.com
Soder-Wick Lead-Free Desoldering Braid is engineered for high-temperature, lead-free solder removal. Maximizes heat transfer to the solder joint, melting the solder faster and more efficiently than conventional desoldering braids. Designed and optimized for all lead-free solders, said ton prolong the tip life on soldering irons.
ITW Chemtronics, www.chemtronics.com
Release 4.2 of the graphical Boundary Scan operating system SYSTEM CASCON features more than 20 new technologies and tools. Besides the Navigator, Component Explorer and an improved programmer, the HYSCAN (Hybrid Scan Technology) addition aids the execution and diagnosis of hybrid formatted test patterns.
HYSCAN is based on a new hardware-independent emulation method and relieves the user from the entire handling of serial-to-parallel vectors. Test program generation and fault diagnosis can be done without knowing the type of test access. The parallel test vectors are connected with the individually configured pin electronic by means of Wrapper Modules. By exchanging these modules, the parallel vectors can be linked to the required pin electronic without re-compilating the test program. The first supported pin electronic are the parallel I/O modules PXI 5296 and PXI 52192 with 96 and 192 test channels, respectively.
The Component Explorer is a graphical tool for the interactive generation and manipulation of intelligent design data. Unknown components and complete component cluster can be defined and implemented into the database. Is directly linked with Scan Vision tools for the visualization of schematic and layout as well as the graphical library.
The Navigator tool for the interactive user guidance gives support in terms of hyperlinks, videos or topic related documents.
The new version is downwards compatible to all previous versions and supports all Boundary Scan controllers on basis of VXI, PXI, PCI, USB, GPIB, Parallel Port, RS232 and Fast Ethernet.
GÖPEL electronic, www.goepel.com
HYSCAN is based on a new hardware-independent emulation method and relieves the user from the entire handling of serial-to-parallel vectors. Test program generation and fault diagnosis can be done without knowing the type of test access. The parallel test vectors are connected with the individually configured pin electronic by means of Wrapper Modules. By exchanging these modules, the parallel vectors can be linked to the required pin electronic without re-compilating the test program. The first supported pin electronic are the parallel I/O modules PXI 5296 and PXI 52192 with 96 and 192 test channels, respectively.
The Component Explorer is a graphical tool for the interactive generation and manipulation of intelligent design data. Unknown components and complete component cluster can be defined and implemented into the database. Is directly linked with Scan Vision tools for the visualization of schematic and layout as well as the graphical library.
The Navigator tool for the interactive user guidance gives support in terms of hyperlinks, videos or topic related documents.
The new version is downwards compatible to all previous versions and supports all Boundary Scan controllers on basis of VXI, PXI, PCI, USB, GPIB, Parallel Port, RS232 and Fast Ethernet.
GÖPEL electronic, www.goepel.com
TestXcell provides automated test equipment (ATE) programming, DFT analysis, fixture design output and schematic viewing. Also features design data importing/exporting and a component database pre-populated with 36,000 electrical models and 1,000 package models.
Allows management of the test process from intelligent graphical design data input through net adaptability checking, component testability checking and full mechanical fixture design to the generation of tester input lists and circuit description files.
Supports all major ATE systems and CAD import formats.
Aegis Industrial Software Corp., aiscorp.com
Press Releases
- ViTrox Americas Doubles Capacity at Demo Center in Hutto, Texas
- Absolute EMS Earns ITAR Registration, Strengthening Manufacturing Capabilities for Military and Defense OEM Customers
- The ICAPE Group Announces the Launch of Its E-Shop at Electronica
- ESCATEC Pushes New Boundaries in Micro-Electronics with UV Enhanced Die Bonder Technology