caLogo
Series 204 Horizontal Laminar Flow Clean Benches include an internal motorized filter unit and three-side access for easy cleaning. Available in several sizes, from 2 x 2' to 2 x 6'. 
 
Designed for installation on top of an existing tabletop, with the filter in the rear and the hood on the front. The prefilter may be serviced from behind the unit. Options include a stainless steel housing, stainless steel hood and integrated light.
 
Clean Air Products, www.cleanairproducts.com

Tru-Vue series compact, low-cost sensors feature side- or snout-mount options and highly visible 360° LED indicators for status indication in all directions and from poor vantage points.
 
Suited for material handling, conveyor and assembly applications. Can be surface mounted or mounted like 18-mm cylindrical sensors by the threaded nose. Compact housing and 29-mm housing depth make them flexible. Enhanced status LEDs provide diagnostic functions beyond power and output status.
 
Available sensing modes include diffused, polarized retro-reflective and non-polarized retro-reflective.  Five electrical connection options are available, including cabled, and both pig-tailed and integral connector types. Standard versions have sensitivity adjustments, but tamper proof models are also available to eliminate adjustments by unauthorized personnel.
 
Pepperl+Fuchs, www.am.pepperl-fuchs.com

 

CMS-S1 thermal transfer printer combines terminal block marking, wire marking and equipment marking in one printer. The new, modern design includes a cutter and easy access to the ink ribbon and marking material.
 
ZBFT markers are usd in the printer for terminal block marking, offering high print quality and a scratch resistant surface.
 
A variety of wire marking labels including CMT markers, self-laminating stickers and shrink sleeves are also available.  For equipment marking, an extensive range of sizes and colors are available.
 
Phoenix Contact Inc., www.phoenixcon.com

 

EUV-700 in-line, conveyorized UV curing station incorporates Fusion F300 version "D" lamps. Has a standard focal distance of 2.1" above the product, which produces a 1" wide curing zone. To accommodate component heights, the lamp housings may be indexed in the z direction (2.1 to 5") to prevent the possibility of overexposure for taller components. Each 6" long UV section is selectable through the system's Touch Screen. This energy saving feature allows operators to only turn on and use the desired width range needed. Selectable width ranges are 6, 12 and 18".

Equipped with safety side doors and multi-stage in-line conveyor integrated into special touch panel controls. Operators can set desired cure times through a variable speed drive located in the center section of the station under the UV lamps. Product transfers on 3 mm edge contact to fit a wide range of applications.

Promation,  www.Pro-mation-Inc.com

 

 

S510 Semiconductor Reliability Test System is a high channel count, turnkey solution for reliability testing and lifetime modeling of ULSI CMOS processes at the 65 nm node and beyond. Said to provide a high degree of wafer-level reliability (WLR) test throughput and flexibility, reducing the time to assess reliability and to perform lifetime modeling. Can also be used for production WLR monitoring or as a lab parametric test system.

The fully automated, multi-channel parallel reliability test system features scalable channel counts from 20 to 72 channels, an independent stress/measure channel for each structure and simultaneous measurement across all channels. Can test multiple devices simultaneously on a wafer in conjunction with a semi-automatic or fully automatic probe station. 

Keithley Instruments, www.keithley.com

 

 

Metallic Static Shield Polyethylene Tubing on a roll allows users to create custom-sized poly bags that inhibit electrostatic discharge (ESD).

Laboratory tested; meets or exceeds the electrical and physical requirements of MIL-PRF-81705D Type III and EIA 541 standards. Protects electronics, switchboard apparatus, PCBs, transistors and other sensitive components from EDS damge.

Joins a full line of rolled poly tubing, including clear, black and pink anti-static styles. When used with the Better Bagger 900e, can be cut and sealed to create custom, on-demand bags up to 8" wide and 99" long. Customization can produce lengths up to 240".

Manufacturers can eliminate the need to order pre-made bags in bulk, thus reducing waste and inventory cost. Depending upon the application, the cost of making on-demand bags can average 50% less than the cost of purchasing pre-made bags.

Better Packages Inc., www.BetterPackages.com

 

 

Page 970 of 999

Don't have an account yet? Register Now!

Sign in to your account