Printek AP1818 benchtop surface mount (SMT) printer includes dual squeegee structure and drive mechanism constructed with a four-bar linkage that permits the main squeegee head, gantry and squeegees to be smoothly pushed back. Is said to create effortless tilting and sliding motion that opens stencil area for easy stencil loading and alignment. Employs two high-resolution compact digital cameras mounted on pantograph style articulating arms; cameras out from printer area for ease of set-up. Comes with integrated tooling table, featuring independent X-Y-THETA and Z-height adjustments, anti-backlash springs and magnetic tooling plate.
Transition Automation, www.TransitionAutomation.com
LJ 745 frameless stencil tensioning system is said to provide uniform tension at >40N/cm. Prints fine-pitch devices such as 01005 components and CSPs.
LaserJob, www.laserjob.ca
Interface Analysis software enables 3D, 2D and statistical review of the complete interface at each temperature point during reflow, and for the combined data set. Data to be analyzed can be collected with any TherMoiré system. Includes Pass/Warning/Fail maps, and graphical results identifying problem areas.
Akrometrix, www.akrometrix.com
MaxiReflow HP void-free soldering combines convection heat and a hyper-pneumatic module. Is equipped with an excess pressure chamber. Each heating zone – as well as zones integrated in the hyper-pneumatic chamber – has a tangential fan. Can also be operated without activating hyper-pneumatic chamber.
SEHO Systems, www.seho.de
Flip-Top tubs for Isopropyl Alcohol (IPA) wipes have lids that spring closed automatically. Are eco-friendly; reportedly reduce waste and emissions. Refill packs fit into Flip-Top tubs and disposable tubs. IPA wipes are available in two different grades: 99.8% pure IPA is for tape head cleaning, defluxing, fiber optics maintenance, and other light cleaning; 70% pure IPA has a slower evaporation rate; is for stencil cleaning to remove pastes and adhesives, oven cleaning, and general maintenance cleaning. Are both made of non-woven polyester material, which is low linting and tear and snag resistant.
Techspray, http://www.techspray.com
iico SMT placement machine places a variety of components, including chips, MELFs, electrolytic capacitors, SO, PLCC, QFP, QFN, TSOP, QFP, BGA, µBGA, LGA, CSP, connectors and odd-form SMDs, and can place from a minimum of 0.5 x 0.25 mm (0201) to 50 x 50 mm as standard. Built on the the EP600 and Progress6 platform. Features new encoders on the X and Y axis to improve accuracy, "smart" nozzles with a new magazine; new head fitted with an 8-position turret with optical sensors and high-resolution digital cameras. Includes flat screen monitor and control panel with latest software. Compatible with all Europlacer feeders (including ii-Feed) and equipment. For small volumes and prototypes.
Europlacer, www.europlacer.com
Press Releases
- OKI Develops Ultracompact Photonic Integrated Circuit Chip Using Silicon Photonics Technology to Realize Various Optical Sensors
- AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Silicon Valley Expo & Tech Forum
- Occam Strengthens Leadership Team with Addition of PCB Expert Dana Korf
- ITW EAE Expands Partnership with Etek Europe to Represent Despatch Products in the UK and Ireland.