EP30TC is a two-component epoxy that contains a thermally conductive filler with very fine particle sizes. Is a NASA low outgassing certified system that can be used for bonding, coating, sealing and encapsulating. Exhibits a thermal conductivity of 18-20 BTU•in/ft²•hr•°F [2.60-2.88 W/(m•K)] and has  the ability to be applied in sections as thin as 5-15µm, resulting in a low thermal resistance of 7-10 x 10-6 K•m²/W. Is a reliable electrical insulator and has a volume resistivity of over 1014 ohm-cm. Is serviceable over temperature range of -100°F to +300°F. Has tensile strength of 5,000-6,000 psi, compressive strength of 24,000-26,000 psi and tensile modulus of 500,000-550,000 psi.

Master Bond
masterbond.com

Sensitive Wire Feeder version 3.0 force-controlled wire feeder has improved software and motors.

BidCQ is a single, easy-to-use interface tool for sending and receiving bill of material (BoM) bid sheets.

Tergo high-performance flux remover is a non-flammable, low-temperature rinsing fluid with a non-volatile additive that performs cleaning function. Is engineered to clean high-temperature solder pastes and fluxes; removes white residues from printed circuit boards. Cleans complex shapes on PCBs. Can be used as a degreaser and to remove slight oxidation and tarnish from finished surfaces. Is compatible with vapor degreasing procedures.

MicroCare 

microcare.com