vVision AOI software verification station displays defect images and features. AOI results are verified and an evaluation is made. Inspection data can be used for various evaluations, including statistical process control. vVerify customizes configuration of the displayed information regarding selection and positioning of the additional images. Ninety-five percent of defects can be directly classified with the defect image transferred from the AOI without reference to actual board. In ValidCompareMode, a previously validated good image is offered for comparison to each defect image. Defect location and additional information can be displayed on a second monitor or through the shift key.

Viscom, www.viscom.com

This inline board cleaning and defluxing system for water-soluble fluxes accommodates PCBs up to 24". Measures 12½ ft. long. Has a 60° angled nozzle directing spray under the components for removal of all water-soluble flux residues. Has high-performance stainless steel spray pumps and a turbine-powered rotating air knife, working with fixed-position air knives. A rinse water closed loop recycler is available for zero discharge operation. 

Manncorp, www.manncorp.com

Pressure Decay Leak Test Calculator is automated and generates nearly instantaneous answers to “what if” modeling of pressure decay leak testing variables from 8-sensor concurrent leak testing technology. Variables that can be manipulated include pressure ranges; leak rate target; number of concurrent pressure decay sensors in use (up to 8 with Optima vT leak and flow tester); customization of test cycle times, including all stages of fill, stabilization, test time, and total, and part/test volume.

USON, Calculators@uson.com

535-10M UV cured epoxy is formulated for disk drive, camera module, optoelectronics and circuit assembly applications. Non-conductive adhesive cures rapidly when exposed to high-intensity UV light. Is low outgassing, flexible, high-strength; does not contain antimony. 

Engineered Material Systems, www.conductives.com