No. 898 is an electrically-heated 650°F universal oven currently used for heat depyrogenation. 12 KW are installed in Incoloy sheathed tubular heating elements. Workspace dimensions are 36" x 36" x 36". Has 6" insulated walls, a type 304, 2B finish stainless steel interior and an aluminized steel exterior. Has a 600 CFM, 1/2-HP recirculating blower. Is equipped with positive latching door hardware, a solenoid operated door lock, and a leg stand. Safety equipment is included for handling flammable solvents; floor contains explosion venting panel. Controls include a digital indicating temperature controller, motor control push buttons, and an on-off heat switch.

The Grieve Corp., www.grievecorp.com

Select Coat SC-280 is for automated and selective conformal coating application. Reportedly provides greater than 99% fluid transfer efficiency. Is said to minimize overspray, masking, and rework. Applies controlled, uniform film under low pressure through dispenser and dispensing nozzle. Has a single valve design and comes in two versions: circulating (SC-280C) and non-circulating (SC-280N). Handles viscosities less than 100 centipoise. Coating thicknesses range from 0.0005” to 0.008” for solvent-based materials. Cross-cut nozzles are available to dispense film pattern widths from 6 to 19 mm. Each nozzle delivers edge definition with a tolerance of ± 0.75 mm. Has a 0 to 90° rotating axis.

Nordson Asymtek, www.nordsonasymtek.com

Hakko FR-870 benchtop board heater designed to elevate the temperature of printed circuit board assemblies to ease soldering and desoldering. Handles medium- to high-mass board assemblies and Pb-free assemblies. Has two independent switchable zones; 248 x140 mm PCB capacity; manual or automatic operation modes; soft EPO to protect assemblies. Preheat is controlled by power or thermocouple. Reflector can be removed for cleaning. Can be integrated with Hakko FR-803B and FM-206 rework stations.

American Hakko Products, www.HakkoUSA.com 

Hakko FA-430 fume extraction system has powerful suction and is quiet. Features three airflow adjustment modes: high, medium and Low. Has a three-stage filtering process and a filter replacement notification function. Detects the number of fan revolutions; notifies the operator of the appropriate time to replace the filter via an indicator light on the front panel. Duct kits sold separately.

American Hakko Products, www.HakkoUSA.com