See-Flo 1100 is a fixed-ratio, positive displacement, meter-mix dispense system ideal for manual and automated adhesive and sealant applications. Meters low- to high-viscosity two-component materials, such as epoxies, urethanes, silicones and acrylics supplied by pumps or pressure tanks. Can be floor-mounted, mobile-cart mounted and may be process integrated with a dispensing robot assembly. For dispensing continuous precision beads.
Sealant Equipment & Engineering, www.sealantequipment.com
Pressurex is a thin flexible sensor film that reveals pressures from 2 - 43,200 PSI. When placed between the contacting surfaces of a flip chip bonder, it changes color directly proportional to the amount of pressure applied. Precise pressure magnitude and distribution is then determined by comparing color variation results to a color correlation chart.
Sensor Products Inc., www.sensorprod.com/pressurex
Sarcon SPG-30A is a high-viscosity, thermal interface silicone compound designed to transfer heat from a board-level source to a heat sink or heat spreader. Offers a thermal conductivity of 3.2 W/m°K. Also a thermal management option for electronic devices that operate at higher frequencies. Exhibits near-zero compression force and conforms to all component shapes and sizes. Is for filling large gaps around circuit board solder points. Requires no heat curing, will not cause corrosion on metal surfaces, and maintains all initial properties across a temperature range between -40º and 150ºC. Is available in 30cc tubes, 330cc cartridges and 10L pails.
Fujipoly America Corp., www.fujipoly.com
Multicore HF108 is a Pb-free, halogen-free solder paste. Has high-speed print capability, a shelf life of up to six months when refrigerated or four weeks at room temperature, and a wide process window.
Henkel, www.henkel.com/electronics