Duralco 125 “stress free" epoxy forms a flexible, electrically conductive bond for continuous use to 400ºF. Is said to be ideal for manufacturing and repairing flexible circuits, solder replacement, bonding semiconductors, EMI shielding, thermistors, wire tacking, heating elements, assembling, and electronics. Offers 400ºF service and reportedly provides good electrical conductivity, high bond strength, thermal and mechanical shock resistance, adhesion to dissimilar substrates and excellent chemical resistance. Hand-held applicator is said to dispense with pinpoint accuracy the mixture epoxy that cures at room temperature (16-24 hrs. at 75ºF; 20 min. at 200ºF) with no objectionable odors. Eliminates mixing, measuring, excess waste and messy cleanup. Is silver-based and resistant to moisture, chemicals and solvents.
 
Cotronics, www.cotronics.com
 

Sarcon GR-Fd thermal interface gap filler pad is a gel-like material manufactured with an integrated nylon mesh layer that is said to prevent distortion and stretching during die-cut operations. Is said to be easier to install. Reportedly will transfer heat with a thermal conductivity of 1.5 W/m°K and a thermal resistance ranging between 0.60 and 3.33°C in²/W, depending on material thickness, when placed between a heat source and a nearby heat sink. Flame retardant TIM is available in nine thicknesses ranging from 0.50 to 5 mm in sheets up to 300 x 200 mm.
 
Fujipoly America Corporation, www.fujipoly.com
 

Polysim 509 Work Surface Mat is for ultra-sensitive environments. Has permanent static dissipative properties. Is made from non-outgassing material. Does not particulate and contaminate the workplace. Is made from thermoplastic urethane. Has abrasion resistance characteristics. Is made from two layers of 0.040 Polysim sealed over an impact-absorbing polyurethane conductive foam core. Is ASTM E84 class 1 and NFPA 701 fire rated. Is available in custom sizes, including any width up to 48", and lengths up to 96". The material thickness is 0.22". Available in black or white. 
 
Simplex Isolation Systems, www.simplexstripdoors.com/dccurtains.htm  
 

Model XSD 702 desiccant cabinet is said to reduce device drying times without oxidation. Reportedly dries MSL 5, 1.4 mm components completely in 24 hrs. Deploys self-regenerating desiccant. The U-5000 Zeolite drying unit is said to achieve humidity levels under 0.5% RH. Also dries taped reels without damage to tape. Include precision measurement, 24/7 data logging and an ergonomic touch screen operator interface.  

Totech Super Dry, www.superdry.info