Z-Check 3D benchtop, noncontact, solder paste inspection and measurement system is said to provide accurate pad specific measurement of solder paste deposits, adhesives and component placement. Provides large scanning area and unique 5-line LED scanning. Comes with full SPC package.

Aprotec Instrumentation, www.aprotecinstrumentation.co.uk

SPI software v. 5.0 has a touch screen feature. Includes Teach, Inspection, Defect Review and Real Time SPC modules. Has a toggle function to switch between interfaces. Includes multi-touch, easy pan, zoom in and out, multi-selection, and unlimited undo-redo options.

CyberOptics, www.cyberoptics.com

WonderMask PX temporary, peelable, latex solder mask reportedly dries in half the time of other solder masks. Is hand applicable and withstands fluxing, wave soldering and cleaning operations. Is said to effectively mask and protect open through-holes and underside components in wave soldering processes, withstanding temperatures up to 650°F. Can be used as a conformal coatings mask. Has strong tensile strength when fully cured, and peels easily, even under harsh conditions.

Techspray, http://www.techspray.com

Flexus surface mount component placement machine features an H-drive said to minimize maintenance and increase working surface. Footprint is 25 cm larger than the FLX, with twice the placement space and 30% higher feeder capacity. Can be equipped with up to 240 intelligent cassette feeders or single type feeders at once. Features new software that incorporates MIS software for setup planning, stock management and traceability, and existing feeder and placement programs. Place up to 6,000 cph with automatic fiducial identification, laser and vision centering. It also can place all SMD components from 01005 up to 50x50 mm with component heights varying from 0 to 20 mm.

Essemtec, www.essemtec.com

5R6-900 benchtop unit now has an enhanced laboratory ramp and soak temperature controller. Can be plugged into the wall as a self-contained temperature control system with its own power supply. Ramp and soak controller can be used wherever user is located. Is a solid state MOSFET bidirectional compact unit capable of loading currents up to 10A. Is PC programmable. Ramp and soak controller connects to a computer through the electrically isolated RS232 communications port. PC can be used as a connector; temperature controller can stand alone. Features a digital display for controlling functions, including adjusting output voltage and setting the temperature. Has an auto output shutdown if the sensor is opened or shorted; includes high, low and no alarm settings.

Oven Industries Inc., www.ovenind.com
 

Quality System Manual and the Quality Management System defined in the manual have been revised. Written testing methods remains unchanged, except for document naming conventions. The firm implemented the same manual at the NSL Analytical site and the NSL Metallurgical site, to have one manual across the organization. The quality conversion process was completed. 

NSL Analytical Services, www.nslanalytical.com

FLM36 is a B-staged film for bonding and sealing applications in the aerospace, electronic, opto-electronic and specialty OEM industries. Reportedly eliminates mixing and measuring. Can withstand temp. up to 500°F; retains high strength properties. Bonds well to metals, composites, glass and many plastics. Is a good electrical insulator. Can endure thermal and mechanical shocks, and thermal cycling. Has good chemical resistance to water, acids, bases, fuels and oils. Has release paper on each side. The assembly is fixtured and cured for 1-2 hr. at 350°F. Bonded parts are returned to 75°F before removing fixtures. Is offered in three standard sizes: FLM36-4A is 4 x 4 x 0.008"; FLM36-8B is 8 x 8 x 0.008", and FLM36-12C is 12 x 12 x 0.006".

Master Bond, www.masterbond.com

Loctite Ablestik ICP 4000 series of silicone-based electrically conductive adhesives address harsh environmental conditions. Withstand operating temperatures as high as 200°C. Reportedly show good performance after 3,000 hr. of 85°C/85% RH temperature and humidity testing, 3,000 cycles of thermal shock analysis from -40° to 175°C, and 3,000 hr. of heat storage at 175°C. Focus on electrical resistance, adhesion, thermal conductivity and flexibility. Have high vibration compatibility. Exhibit low outgassing and bleed during cure.

Henkel, www.henkel.com/electronics

SV2000N valves are available in 3, 12 and 18mm spray paths, suitable for urethanes, flux and silicone coatings. Are actuated by air pressure sequenced by SVC100 controller. Air pressure opens a needle in the valve, allowing material to flow; a separate air line creates pressure in the valve exit cap, atomizing the fluid. Controller sequences the time relationship between a fluid start signal and an atomizing signal. Can be installed to existing production lines with signal control or used as a bench-mounted spray station.

Fisnar, www.fisnar.com

This thin component storage cart is 20" x 36" x 58". Is reportedly ideal for line side storage of component reels, JEDEC trays, and chip tubes. Supports between 7" to 15" reels. Shelves are adjustable.

Bliss Industries, http://www.blissindustries.com/fr_index.htm?/products/smtreelstorage/bliss-thin-component-storage.php

TS9200D series jet tech valve has a single, replaceable diaphragm; eliminates dynamic fluid seals. Small mass of diaphragm design reportedly allows faster cycle rates. Reduces energy needed to eject a drop of fluid; is adjustable. Is capable of jetting fluid viscosities to 400,000 CPS. Produces 300 droplets per sec.

Techcon Systems, www.techconsystems.com

DMS300 and DMS1000 digital microscopes offer consistent illumination throughout the zoom range and coded optics for precise and reliable results. Optimized for easy and fast quality control, inspection and documentation in industrial applications. Provide natural reproduction without an eyepiece and a perfect overview of the specimen. Shows up to 30 images per sec. on HD monitor or computer screen, or can be operated independently with included infrared remote control.

Leica, www.leica-microsystems.com