EP21FRNS-2 two-part epoxy has a non-halogen filler. Passes UL 94V-0 testing for flame retardancy in potting, encapsulation and casting applications. Produces low smoke levels.  Features one to one mix ratio by weight and cures at room temperature or more quickly at elevated temperatures. Bonds to a variety of substrates including metals, glass, ceramics and many plastics. Withstands exposure to a range of chemicals, such as water, fuels, lubricants and acids, among others. Serviceable over temperature range of -51° to 90°C. Comes in ½ pint, pint, quart, gallon and 5 gal. kits, premixed and frozen syringes, bubble packs and gun dispensers. Is for the computer, aerospace and other industries.

Master Bond, www.masterbond.com

CA-105 conductive LED die attach adhesive is for attaching LEDs and other small semiconductor die to silver and copper lead frames. Has a high glass transition temp. to facilitate wire bonding small die; has low extractable ionics and high adhesion to silver and copper lead frames. Has a dispensing open time (pin transfer) greater than 24 hr. (measured as a 25% increase in viscosity).

Engineered Material Systems, www.emsadhesives.com

ProDesk3D full-color 3D desktop printer is intended for rapid product prototyping and desktop manufacturing. Can select colors for 3D objects, make refinements, and print. Automates printer setup, including auto-leveling the build platform.

botObjects, http://botobjects.com

UltraClean VOC-free benchtop flux remover cleans rosin fluxes, synthetic fluxes, "no-clean" fluxes, and Pb-free materials. Can remove silicone-based glues, coatings and insulators. Meets health, safety and environmental restrictions. Is halogen-free and ozone-safe. Uses a non-flammable propellant. Does not use water or alcohol. Is reportedly ideal for rework and repair. Packaged in a 300gm aerosol. Comes in 3.9L, 19L, and 200L packages.

MicroCare, www.microcare.com

95 RX Flux is low-VOC technology developed for vintage soldering machines that use foam fluxers. Can foam up to 0.5" high; reportedly will not creep out of slots and PTH. Water content provides strong foaming bubbles that carry kinetic energy; assists in cleaning surfaces and gets flux in holes that need to accept solder. Prevents solder balling, with a minimum amount of residue.

Cobar Solder Products, www.cobar.com 
Balver Zinn Group, www.balverzinn.com

Juliet desktop tester now supports all embedded system access technologies for in-system programming of Flash, PLD and MCU, as well as structural and functional at-speed board test. Universal adaptors for fast prototype adaption, an automated release mechanism, and a pneumatic lock mechanism are available. Provides same user interface as Rapido inline programmers. Is equipped with an interface to an exchangeable adaptor to accommodate different UUT. All systems provide four independently programmable UUT voltages, including current measurement for two and four registers for support of gang-applications.

Goepel electronic, www.goepelusa.com

Wafer-Vac general-purpose wafer vacuum handling tool comes with 8" molded wafer tip (WV-9000-MW8). Handles wafers, solar cells and other substrates. Diaphragm vacuum pump generates up to 10" of mercury with an open air flow of 2.3 lpm. Connects to ground automatically with a three-wire power cord. Class 100 Cleanroom safe. Comes standard with long-life pump and push-button wafer tip pen: VWP-500-2.5mm. Has a footprint of 7¼" x 3" x 2½" and comes with 6' of clear coiled vacuum hose. Plugs directly into 110V 50/60 Hz.

Virtual Industries, www.virtual-ii.com
 

Rapido RPS3000-S32XL provides an increased surface for multi-board panels up to 500 x 500 mm. Is based on Scanflex with short wire interface for up to 32 sites; supports double-sided probing for up to 3,000 nails. Developed for in-system programming of non-volatile memories such as Flash, MCU and PLD. Allows a combination of programming tasks with test strategies such as boundary scan, processor emulation, chip embedded instruments or functional test; can be executed in parallel on 32 boards integrated into one panel.

Goepel electronic, www.goepelusa.com

NC722 low-melting SnBi solder paste is halide-free and rosin-based. For use with low-temperature alloys such as Sn42Bi58. Reportedly offers good open times, abandon time and soldering activity with all surface finishes. Meets or exceeds ANSI/J-STD -004, -005 requirements, as well as Bellcore test criteria. Features print volume consistency with surface area ratios as low as 0.55. Is suitable for high RH areas.

FCT Assembly, www.fctassembly.com

PowerSpector series includes four desktop and three inline AOI machines. FDAz inspection head is designed for post-reflow applications with objects invisible to systems with top-viewing cameras, such as J leaded components and QFNs; inspects SMT and THT component bodies for presence/absence, type, polarity, offset, text, colors, etc., and components solder fillets for excessive, insufficient, no solder, shorts, lifted leads, etc. Suitable for use in pre-reflow, post-reflow, post-wave and post-selective; can be used for 2D solder paste inspection and first article inspection. High-res top camera has telecentric lens and multiplexed 8x CameraLink side camera technology with Tilt-Shift lenses in 45/45° configuration; can choose between 10µ and 18.75µ per pixel lenses. Three light sources with different colors and from different angles create a profile of solder menisci, while the main light results in real color representation of components. Diffused On Axis Light (DOAL) projects 90⁰ on the target components. Motorized, vertical height-adjustable optical head compensates for PCB warpage and reportedly adapts to any PCB thickness.

MEK, www.mek-europe.com 

Model P-2021-5942 clean room ionizing gun removes static and contaminants. Used with compressed air or nitrogen, can be used for sensitive surfaces and in targeting difficult areas. Provides zero-volt offset performance. Does not require an outside power source; is balanced without the need for periodic calibration. Is designed to be accessible with a hook built into the handle for storage.

NRD, www.neutralizerac.com

Konform UR-A and Konform HR water-based conformal coatings provide protection for circuit boards, low odor, and lower VOC (volatile organic compounds) emissions. Konform UR-A protects circuits from moisture and airborne contaminants. Protects against abrasion, humidity, salt, corrosive vapors, solvents and fungus for printed circuit board and electronic assemblies. Konform HR is a hybrid of acrylic and urethane resins. Provides protective barrier against humidity, salt, corrosive vapors and fungus. Are both compliant with RoHS and REACH directives.

Chemtronics, www.chemtronics.com