caLogo

Products

9300 Series equipment platforms offers omnidirectional, ultra-low-frequency vibration damping and automatic leveling while raising equipment only inches off the floor. Proprietary airmount system provides vertical isolation, while tri-filar pendulum assembly provides stable cradle support for horizontal isolation. The pendulum assembly eliminates the need for the resonance-generating corner lift brackets.

Platform stiffness is comparable to that of a 3" plate of solid steel at approximately one-third the weight and with more efficient damping — vibration isolation efficiencies at maximum load (up to 25,000 lbs.) can be as high as 98% for vertical natural frequency and 96% for horizontal natural frequency. 

Standard platform is a rigid, lightweight, epoxy-laminated "sandwich" — a 2" composite layer between 1/2" top and bottom plates of corrosion-resistant steel.

Standard finish is black polyurethane, but can be finished with stainless steel or white epoxy powder coat.  Available in custom sizes or shapes, with extra leg supports, and with cutouts or notches. Nonmagnetic platforms are also available.

Applications include vibration isolation for SEMs, TEMs, CMMs, steppers and mask aligners.

Kinetic System, Inc., www.kineticsystems.com

In addition lead-free pastes and complementary fluxes for the SMT industry, Heraeus CMD will also introduce the F10B Series of no-clean solder pastes, said to offer exceptional print-to-print consistency and wetting capabilities. The series is the latest in the line of solder pastes, tack fluxes and SMT adhesives required in demanding surface mount manufacturing processes.

Also on display will be the full line of fluxes for reworking and solder ball attachment for no-clean and water-soluable applications. These fluxes feature extreme purity to ensure realiability.

Heraeus Circuit Materials Division (CMD), Nepcon East Booth 5024

 

The Gryphon line of AC and DC axial fans provides customers with economical thermal management solutions.
 
Integrated into each air-moving product is an electronic protection feature that automatically prevents damage to the product's motor and electronics, even if the propeller is physically jammed while the unit is powered. 
 
Standard tachometer feature is integrated in each DC axial fan.  The tachometer is a two pulse per revolution, open collector signal that measures rotational speed. It allows a host system to know the speed and health of a fan at any time during normal operation.                                            
 
Measure 25 to 120 mm, with 12, 24 and 48 volt versions. AC products are offered in 115 and 230-volt versions and compatible with either 50 or 60 Hz power sources.  AC models come standard with fitted terminals and are available with an optional plug and cord set to fit any connection. 
 
Each model is RoHS compliant and covered by a 12-month warranty. 
 
Comair Rotron, http://www.comairrotron.com

New software and hardware improvements offer increased flexibility in the  design, specification and maintenance of horizontal carousel systems, and provide enhanced operating controls. Typically used for product picking in warehouse and distribution center operations and in buffering applications for manufacturing operations.

Improvements include modifications to the SpectrumPlus warehouse control system software. Streamlined reporting, improved processing speed and new inventory management functions are said to provide better control of the carousel induction process, carousel inventories and product replenishment.

Hardware enhancements include a new standardized track design, which enables the use of different sized product shelves on the same carousel track; the replacement of DC drives with AC drives; and the use of non-proprietary controls. Customers can now specify commercial, off-the-shelf control hardware.

FKI Logistex North America, www.fkilogistex.com

 

 

Series 204 Horizontal Laminar Flow Clean Benches include an internal motorized filter unit and three-side access for easy cleaning. Available in several sizes, from 2 x 2' to 2 x 6'. 
 
Designed for installation on top of an existing tabletop, with the filter in the rear and the hood on the front. The prefilter may be serviced from behind the unit. Options include a stainless steel housing, stainless steel hood and integrated light.
 
Clean Air Products, www.cleanairproducts.com

Tru-Vue series compact, low-cost sensors feature side- or snout-mount options and highly visible 360° LED indicators for status indication in all directions and from poor vantage points.
 
Suited for material handling, conveyor and assembly applications. Can be surface mounted or mounted like 18-mm cylindrical sensors by the threaded nose. Compact housing and 29-mm housing depth make them flexible. Enhanced status LEDs provide diagnostic functions beyond power and output status.
 
Available sensing modes include diffused, polarized retro-reflective and non-polarized retro-reflective.  Five electrical connection options are available, including cabled, and both pig-tailed and integral connector types. Standard versions have sensitivity adjustments, but tamper proof models are also available to eliminate adjustments by unauthorized personnel.
 
Pepperl+Fuchs, www.am.pepperl-fuchs.com

 

CMS-S1 thermal transfer printer combines terminal block marking, wire marking and equipment marking in one printer. The new, modern design includes a cutter and easy access to the ink ribbon and marking material.
 
ZBFT markers are usd in the printer for terminal block marking, offering high print quality and a scratch resistant surface.
 
A variety of wire marking labels including CMT markers, self-laminating stickers and shrink sleeves are also available.  For equipment marking, an extensive range of sizes and colors are available.
 
Phoenix Contact Inc., www.phoenixcon.com

 

EUV-700 in-line, conveyorized UV curing station incorporates Fusion F300 version "D" lamps. Has a standard focal distance of 2.1" above the product, which produces a 1" wide curing zone. To accommodate component heights, the lamp housings may be indexed in the z direction (2.1 to 5") to prevent the possibility of overexposure for taller components. Each 6" long UV section is selectable through the system's Touch Screen. This energy saving feature allows operators to only turn on and use the desired width range needed. Selectable width ranges are 6, 12 and 18".

Equipped with safety side doors and multi-stage in-line conveyor integrated into special touch panel controls. Operators can set desired cure times through a variable speed drive located in the center section of the station under the UV lamps. Product transfers on 3 mm edge contact to fit a wide range of applications.

Promation,  www.Pro-mation-Inc.com

 

 

S510 Semiconductor Reliability Test System is a high channel count, turnkey solution for reliability testing and lifetime modeling of ULSI CMOS processes at the 65 nm node and beyond. Said to provide a high degree of wafer-level reliability (WLR) test throughput and flexibility, reducing the time to assess reliability and to perform lifetime modeling. Can also be used for production WLR monitoring or as a lab parametric test system.

The fully automated, multi-channel parallel reliability test system features scalable channel counts from 20 to 72 channels, an independent stress/measure channel for each structure and simultaneous measurement across all channels. Can test multiple devices simultaneously on a wafer in conjunction with a semi-automatic or fully automatic probe station. 

Keithley Instruments, www.keithley.com

 

 

Metallic Static Shield Polyethylene Tubing on a roll allows users to create custom-sized poly bags that inhibit electrostatic discharge (ESD).

Laboratory tested; meets or exceeds the electrical and physical requirements of MIL-PRF-81705D Type III and EIA 541 standards. Protects electronics, switchboard apparatus, PCBs, transistors and other sensitive components from EDS damge.

Joins a full line of rolled poly tubing, including clear, black and pink anti-static styles. When used with the Better Bagger 900e, can be cut and sealed to create custom, on-demand bags up to 8" wide and 99" long. Customization can produce lengths up to 240".

Manufacturers can eliminate the need to order pre-made bags in bulk, thus reducing waste and inventory cost. Depending upon the application, the cost of making on-demand bags can average 50% less than the cost of purchasing pre-made bags.

Better Packages Inc., www.BetterPackages.com

 

 

DEK has introduced Setup Verification and Traceability for screen printing, to prevent setup errors, maximize screen printing productivity and gather data for continuous improvement. Optional features also now allow manufacturers to achieve board-level traceability.

Includes software and hardware to automatically identify the stencil, paste and other setup variables as the machine is prepared. Verification compares the actual values with those specified in the product file, and can be programmed to halt the machine before printing commences or generate a warning in event of an error. Software supports 1-D and 2-D barcodes, and all data is recorded for analysis.

The optional traceability module and conveyor-mounted barcode reader identify each board entering the machine and link the board ID with the setup verification data, which is stored on the machine's hard drive. This delivers board-level traceability for screen printing.

The optional traceability module and conveyor-mounted barcode reader identify each board entering the machine and link the board ID with the setup verification data, which is stored on the machine's hard drive. This delivers board-level traceability for screen printing.

Records setup variables, as well as ambient temperature and humidity, operator identity and line identity. Data is accessible via a network connection, can be copied onto removable media and can be used as input to statistical process control tools.

DEK, www.dek.com

 

 
RTW 50 and 100 Watt Series are RoHS (Reduction of Hazardous Substances) compliant, single-output, full featured power supplies. Both power groups are less than 1" high and have footprints of 15.68 sq. in. and 20.16 sq. in. respectively.  Features include isolated remote ON-OFF contol, power OK LED, active PFC, FCC Class B conducted and radiated emissions compliance, built-in over voltage and over current protection and CE marking to the making the RTW ideal for applications in harsh environments. 

Kepco Inc., www.kepcopower.com/rtw.htm      

                                                                     

Page 495 of 509

Don't have an account yet? Register Now!

Sign in to your account