caLogo

Products

Electronics engineers requiring the condensed system architecture in camera inspection and vision-aided robotics applications but needing the transmission performance available from larger connectors in Camera Link applications can take advantage of Shrunk Delta Ribbon (SDR) Connectors and 0.8 mm Cable Assemblies from 3M Electronics. 
 
Comprised of RoHS-compliant boardmount connectors and a variety of cable assemblies developed to address Camera Link and mini Camera Link (mini CL) interface requirements while offering signal integrity.
 
New connector provides a variety of SDR solutions for Machine Vision and CL applications that require a smaller form factor with high transmission speeds.
 
SDR Connector uses a ribbon contact system with a 0.8 mm contact pitch. SDR low profile, polarized boardmount connectors are constructed of high temperature plastic bodies with 30 micron gold contacts, stamped metal EMI/ESD interface, and come with installed jack sockets and supporting board mounting hardware.  The installed jack socket supports the corresponding assembly thumbscrew interface.
 
Boardmount products are offered in both vertical and right-angle RoHS-compliant PTH and SMT attachments.
 
SDR Cable Assembly consists of rugged, over-mold shells with a thumbscrew locking system.  Come in a variety of MDR/SDR configurations. Uses 28 AWG cable and wiring configurations that meet legacy CL specifications. Available in 30 AWG configuration upon request.
 
 
3M has added two features to its CL assembly offering for both MDR and SDR.  The first is an over-mold, right angle configuration that provides a low profile, thumbscrew interface which reduces the assembly profile by more than four inches compared to traditional straight-exit backshell options. The second is an extender assembly for adding length to existing cables or providing means for bulkhead/mid-span/pass-through requirements. Extender cables feature over-mold MDR receptacles.
 
 
3M Electronics, 3M.com
 
 
 
 
Z-2000 series of flame, furnace and tandem atomic absorption spectrophotometers can accurately determine low concentrations of toxic elements such as cadmium, mercury, lead and hexavalent chromium. This is of increasing importance with the implementation of the Waste 
Electrical and Electronic Equipment Directive and the planned implementation of the Restriction of Hazardous Substances.
 
A new method of sample preparation for polyethylene samples uses high pressure microwave digestion with nitric acid. This replaces traditional extraction methods using sulphuric acid which is not suitable for the measurement of  lead. Details of the new  extraction method can be found in a new technical data sheet. (AA Sheet No. 72) For a copy,  e- mail: info@hitachi-hitec-uk.com.
 
Has polarized Zeeman background correction method on both flame and furnace instruments, for effective background elimination and stable baselines. The dual-beam optics feature twin detectors. Detection limits for the flame instrument (in micrograms/g) are Cd: 2, Pb: 50 and Cr: 
50. For the furnace instrument they are: Cd: 0.01, Pb: 0.25 and Cr:  0.2.
 
Hitachi High-Technologies Corp, hitachi-hitec-uk.com
AirMax VS signal connectors have passed both the RoHS and FCI Lead-Free qualification. While the AirMax VS Guides have always been available only as lead-free parts, the qualification of the signal connectors is the next step in ensuring that the VS family meets the environmental specification.
 
RoHS qualification included testing both receptacles and headers for insertion, retention and repair. The FCI lead-free qualification is an internal six-month test for whisker growth.
 
The test documentation report will be available in approximately three weeks.
 
VS connector system offers high-speed computing and networking designers versatility in structuring their backplane signal routing.
 
VS power connectors are in the process of being RoHS-qualified.
           
FCI, fciconnect.com

Page 1905 of 2032

Don't have an account yet? Register Now!

Sign in to your account