Agilent N6462A DDR4 compliance test application is for systems using double-data-rate 4 memory. Can accelerate turn-on and debug of DDR4 systems by automating the execution of physical layer tests. Uses four high-bandwidth oscilloscope channels. DDR4 dynamic random-access memory technology with high-bandwidth interface operates at a max. of 1.2 volts and can achieve a data transfer rate of up to 3.2 giga transfers per sec. Is designed for high-end computing applications. Application provides automated clock, electrical and timing tests. Automatically configures oscilloscope for each test and generates an HTML report at the end of the test. Report compares results with specified test limit and indicates how closely the device passes or fails each test. Can debug signal integrity issues using N6462A software in conjunction with InfiniiScan multichannel and multizone triggering features.
Agilent Technologies, www.agilent.com
PC003 solder practice kit is IPC-A-610 compliant. Is for training and testing employees. Double-sided PC board has pads for 13 different components: one through-hole dip14 and 12 surface-mount components. Each item is individually bagged and tagged. Consists of PLCCs, SOICs, TSSOPs, SOTs, passives, and QFPs with 0.5mm and 0.65mm pitch. Is for classroom training and practice.
Practical Components, www.practicalcomponents.com
PC015 rework kit conforms to IPC-7711/7721 standards. Is for rework training or to evaluate current rework procedures. Contains two fully populated boards and enough components to repopulate the boards after the removal of components. Contains a range of components from through-hole to chip scale. Is boxed with all components individually bagged and labeled.
Practical Components, www.practicalcomponents.com
PC013 hand solder practice kit comes in four kit configurations. Comes with a variety of through-hole components. Each kit is boxed with components individually bagged and labeled. Comes standard with an SO16 resistor network, but can be upgraded to a Flat Pack 16. Is for use in classroom settings. Available in Pb-free and SnPb.
Practical Components, www.practicalcomponents.com
PC016-J-STD-E mixed technology soldering kit conforms to IPC J-STD-001E. Is for training and evaluating students and employees. Contains a variety of standard surface mount and through-hole components with traces. Each kit is individually boxed with all components bagged and labeled. Board size: 3" x 4". FR-4 board material, 0.062" thick, HASL finish.
Practical Components, www.practicalcomponents.com
os3610 Optical Strain Sensor uses fiber Bragg grating sensor technology; is optimized for surface mount applications. Contains one FBG for strain measurement and a second FBG for active temperature compensation. Can visually preset an ideal zero-strain point. Hard stops protect the gage from over travel. Is IP67-rated and has steel tubes that seal out the environment and provide a low-resistance connection between end brackets.
Micron Optics, www.micronoptics.com
Press Releases
- OKI Develops Ultracompact Photonic Integrated Circuit Chip Using Silicon Photonics Technology to Realize Various Optical Sensors
- AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Silicon Valley Expo & Tech Forum
- Occam Strengthens Leadership Team with Addition of PCB Expert Dana Korf
- ITW EAE Expands Partnership with Etek Europe to Represent Despatch Products in the UK and Ireland.