3800 8th Generation automated programming system combines Vector Engine Co-Processor technology, universal device support, and on-the-fly vision centering. Supports microcontrollers, NAND flash, NOR flash, serial flash, managed NAND flash, E/EPROM, flash EPROM, and other technologies with densities up to an 8 Eb theoretical limit. Supports devices with voltage down to 0.7 (Vdd). Co-processor design hardware accelerates waveforms during programming cycle. Includes LaserAlign sensor. Ideal for mid- to high-volume production. Can use eight to 16 socket cards, and is compatible with Flashstream socket cards.
BPM Microsystems, www.bpmmicro.com
NPM-W (Next Production Modular Wide) is a platform for processing printed circuit boards up to 750 x 550mm, placing components up to 120 x 90mm, and accommodating up to 120 unique inputs per module. Has a throughput of 70,000 cph in a 1280mm length. On-board fluxer permits PoP components from both tape and tray, while providing necessary feeder inputs. 3D sensing and chip thickness sensing are possible. Uses features of CM-series placement equipment.
Panasonic Factory Solutions Company of America, www.panasonicfa.com
FumeCube fume extractor now includes a remote control and machine communication interface. Can be connected to one or two flexible extraction arms. Arms can be attached to a bench using clamp brackets and the integrated airflow valve supplied. Is stainless steel and features a powerful blower to draw contaminated fumes away from the workers breathing zone; the fumes are passed through a three-stage filter system. Is quiet and portable.
Purex, www.purex.co.uk
Sarcon XR-v-AL is a silicone thermal interface material that offers the installation flexibility of a putty-like sheet and the performance of a high-end gap filler pad. Provides thermal conductivity of 6.0 W/m°K and thermal resistance of 0.04 °Cin2/W. Non-flammable, peel-and-stick material is 0.11 mm thick and can be applied to almost any electronic component or heat sink. Is available in sheet form on a carrier up to a max. 50 mm x 50 mm. Exhibits low contact resistance and transfers heat from its source to a heat sink or spreader.
Fujipoly America Corp., www.fujipoly.com
No. 799 is an electrically-heated 1382°F inert atmosphere cabinet oven, used for processing ceramic components prior to assembly. 60KW are installed in alloy wire high-temperature plug heaters. Workspace dimensions are 38" x 38" x 50". Has 12" thick insulated walls comprised of 2" of 1900°F block and 10" of 10 lb. density rockwool. Has a type 304, 2B finish stainless steel interior, and is equipped with a solenoid operated door lock. A 3000 CFM, 3-HP alloy recirculating blower provides horizontal airflow to the oven, and a 325 CFM cooling blower pulls room air through the air jacket on the inner oven.
The Grieve Corp., www.grievecorp.com
Prostat Q007 Qube is a dual-socket grounding plug that provides an ESD ground path to a previously tested receptacle. Replaces electrical ground circuit testers and indicators with a means to connect to grounded electrical outlets. Is for ESD audit measurements and can be used to ground workstations, mats, wrist strap testers, instruments and other ESD products to an approved pretested facility electrical ground. Provides dual-banana receptacles encased in a fire retardant ABS with a solid brass grounding pin. Straight line configuration provides two ground connections while occupying one outlet. Is sold in tubes of five, or singularly in a combination with additional grounding items.
Prostat Corp., www.prostatcorp.com/Qube
Press Releases
- OKI Develops Ultracompact Photonic Integrated Circuit Chip Using Silicon Photonics Technology to Realize Various Optical Sensors
- AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Silicon Valley Expo & Tech Forum
- Occam Strengthens Leadership Team with Addition of PCB Expert Dana Korf
- ITW EAE Expands Partnership with Etek Europe to Represent Despatch Products in the UK and Ireland.