V810 S2 EX 3D inline AXI inspects boards up to 482mm x 609mm. Provides support for boards up to 7mm thick and 4.5kg. Board top clearance is enhanced with 50mm and bottom clearance of 70mm. Inspection area is up to 18.7" x 24". Features an 8-core processor with 128GB of RAM. Simultaneous Efficient Reconstruction Technique and a 64bit imaging processor architecture combine Predictive Slice Height into a single scanning path. Phase Shift Profilometry 2 (PSP 2) reportedly boosts projection and image acquisition speed up to 10x faster using in-house proprietary projector.

ViTrox, www.vitrox.com

VC F series intelligent board cameras are designed for use in intelligent transportation systems. Are suitable for quality inspection and production control. Are based on a Freescale quad-core processor that provides 4 x 1GHz computing power. Are equipped with programmable GPU; use VC Linux operating system. Feature one or two remote 1/1.8ʺ CMOS sensors connected by a 30mm or 80mm cable. Sensors provide a 1,280 x 1,024 (WVGA) or 1,600 x 1,200 pixel resolution. A 1GBit Ethernet interface enables integration into automation environments. Include two USB interfaces and an HDMI output.

Vision Components, www.vision-components.com

SQ3000 3D automated optical inspection maximizes features multiview 3D sensors for fast inspection. Incorporates Multi-Reflection Suppression technology (MRS) and 3D algorithms for microscopic image quality at production speeds. Easy-to-use, intuitive interface with touch control facilitates minimal training and operator interaction. MRS technology is said to inhibit reflections that can distort data, especially on shiny components, enabling precise 3D representation while the architecturally superior sensor design captures and transmits data simultaneously and in parallel.

CyberOptics, www.cyberoptics.com

StripFeeder Mini is for loading tape-and-reel components onto compact modules for prototyping and high-mix, low-volume applications. Features same design as original StripFeeder, but is 134mm x 152mm. Is suited for smaller prototype and rework machines, as well as most SMT pick-and-place equipment. Equipped to handle short strips of components, such as 2-4" of tape. Offers increased lane capacity; can run two StripFeeder Minis in the same space as one StripFeeder. Removable rails can be mounted to accommodate array of tape sizes in same feeder. Can be adjusted by removing rails and repositioning them on the base plate (4mm pitched pattern). Rails align with pin locaters and lock down tightly with magnets. Also features mechanical lock-spring to hold the tape in place by the sprocket hole for part registration and pick-and-place applications. Can remove rails to accommodate larger components up to 120mm tape width. Is compatible with most SMT equipment.

Count On Tools, www.cotinc.com