SV540 vapor phase soldering machine is for individual and series production. Features a max. board size of 540 x 360 x 80mm. Fits through doorways and has built-in profiling capabilities. Designed for small- to mid-volume production. Is reportedly ideal for soldering BGAs, LGAs and MID units. Includes fluid filter system and can be connected to exhaust or small filter system to remove solder odors. Additional features include front loader; two-chamber design; oxygen-free soldering; no overheating of components; no ΔT´s throughout assembly.

IBL Technologies, www.ibl-tech.com  

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: PCBWEST.COM

JT 5705/FXT is a compact, single-board, multi-function JTAG tester that supports analog measurement and stimulus, frequency measurements, digital I/O, boundary scan testing and in-system device programming. Tester cards can be mounted on carriers featuring Pylon connectors.

JTAG Technologies, www.jtag.com   

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: PCBWEST.COM

Zero Smog EL provides fume extraction for up to two workplaces. Provides clean, reconditioned air with a combo ultrafine H13 HEPA/10% active carbon foam filter that captures 0.3µm, plus low-volume gas. Includes M5 dust pre-filter that captures 40 to 50% of particles up to 100µm. Features maintenance-free, brushless turbine, energy-saving air recirculation, a simple filter replacement process and optional remote control. Has blower capacity of 220m³/h and extraction power of 2,500Pa. Is compatible with other fume Weller extraction systems.

Weller, www.weller-toolsus.com

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: PCBWEST.COM

BlueWave MX-150 is an LED spot-curing system with curing flexibility. Can be used as benchtop unit or integrated into an automated system. LED emitters are available in 365, 385, or 405nm wavelengths. Curing energy is created using LED chip in emitter. Emitter can be mounted to robotic arms or farther from the controller without intensity variations. Can be activated by foot pedal, LCD touch screen, or through a PLC interface.

Dymax, www.dymax.com

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: PCBWEST.COM 

PWR-4 non-flammable solvent cleaners are replacements for n-propyl bromide (nPB) and other toxic industrial solvents. Blast off oils, greases, fluxes, silicones, dirt and grime. Are available in aerosol or bulk for vapor-degreasing, ultrasonic and immersion cleaning. Engineered to remain effective over thousands of cycles in vapor degreasing equipment. Safe for metals such as aluminum, magnesium, titanium, and brass. PWR-4 Flux Remover cleans baked-on R, RMA and no-clean fluxes from electronic assemblies. PWR-4 Industrial Maintenance Cleaner cleans difficult greases and oils from electronics, relays, and motors.

Techspray, www.techspray.com

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: PCBWEST.COM

CheckMate Job Tracking software is targeted for small to mid-size companies that need a flexible way to track labor and materials against jobs. Number of hours spent on a job can be broken down into tasks, employees or departments. Work order is printed with a barcode ID number; each employee is assigned a barcoded badge. Work order number and badge are scanned using a barcode reader as work begins on the job. When used in conjunction with CheckMate Stockroom, full materials management is added to data. Location of work order within the manufacturing process can be tracked. Job Data includes a Time and Attendance module, which collects labor hours for payroll.

Dynamic Systems Inc., www.dynamic-systemsinc.com

Sherlock Automated Design Analysis software v. 5.0 features modeling regions, attached heat sinks, NX Nastran support, and an IMEC plated through-hole fatigue model. Includes added support for user-defined PCB modeling regions for FEA analysis or model export. Areas of particular interest can be viewed with greater detail; enables users to specify different meshing properties for different PCB areas. Can create custom meshes for key areas of the PCB. Modeling regions can be used to export only a subset of the PCB or to exclude one or more regions from the PCB model. Can model various types of heat sinks, in addition to the PCB, components, and mount points for finite element analysis. Can create attachment points for heat sinks from mount points; heat sink editor allows properties for multiple heat sinks to be modified simultaneously. Includes Abaqus FEA engine integration and support for NX Nastran FEA engine.  Can export mesh models using NX Nastran bulk data file format.

DfR Solutions, www.dfrsolutions.com

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: PCBWEST.COM

Alpha SnCX Plus 07 Ag-free cored solder wire is a fast-wetting solution with clear residue for medium to lower end assemblies. Provides low-spatter and fumes and reportedly has excellent soldering performance, even at 370°C. Is good for rework and touchup and is LED capable.

Alpha Assembly Solutions, alphaassembly.com

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: PCBWEST.COM

TBS2000 oscilloscope features the longest record length and largest display in its class for faster signal evaluation and troubleshooting. Features 9" WVGA display for easy signal visualization and a comprehensive set of automatic waveform measurements that are coupled with graphical explanations. Displays 15 horizontal (time) divisions. Has a 20 Mpoint record length with single-knob pan and zoom, to capture long time duration signals and easily navigate to find important details. Comes in 70MHz or 100MHz bandwidth and with two or four channels. Wi-fi dongle support for wireless connectivity

Tektronix, www.tek.com/tbs2000

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: PCBWEST.COM

Pilot4D V8 HF combines flying probe technology and high frequency testing. Integrates dedicated HF instrumentation on Pilot V8 platform to verify HF signals up to 1.6GHz. High performance measurements include clock frequency, rise and fall times, setup and hold time of critical signals. Also has ICT and functional test capability. Optional integrated LabVIEW/TestStand software interface.

Seica, seica.com

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: pcbwest.com

Electro Polishing Gel is for polishing selected parts of stencils, for greater control over the level of polishing, time and cost savings. Can be applied only to areas that require polishing. Can be used to polish pre-mounted foils, reportedly eliminating starting reference point errors and distortion due to repeated tensioning and handling issues. Degree of electropolishing can be controlled through gel color change, and power consumption is reduced from the traditional 400 to 1000A at 12V to 3A at 12V. Requires approximately 100ml for a typical stencil.

Datum Alloys, datumalloys.com

TR5001Q SII Inline multi-core in-circuit tester system features up to four-core parallel testing. Has intuitive programming application software and high performance hardware for rapid testing and serial programming of up to four boards at once.

Test Research Inc., tri.com.tw