SPV screen printer features an innovative board handling system for leveraging various production flow schemas to increase production efficiency. Print cycle time of 10 s*2 including the entire printing process (PCB transfer, recognition and cleaning) per substrate. Simultaneous printing operation and mask cleaning. Dual-lane system simultaneously processes front- and back-side printing by utilizing a common screen mask that includes both images. Eliminates need for additional conveyors.

Panasonic Factory Solutions Co., http://www.panasonic.com

S3X58-M650-7 solder paste is ICT-compatible and halogen-free.  Reportedly has lower contact resistance and leaves less residue on probes compared to conventional products. Prevents buildup of flux residue on solder joint. Reduces amount of gas generated; minimizes amount of voids, especially for smaller pads. Melting point is 217° to 219°C.

Koki Solder, www.kokiamerica.com

S3X58-M555 halogen-free solder paste maintains activation by suppressing activator reaction at room temperature. Shows melt-ability during reflow process. Multiple activators have been encapsulated and blended. Withholding activation at room temperature, viscosity can be stabilized. Is said to show no deterioration on surface insulation resistance after 200 hr. on moisture cycle test. Wets and spreads without dewetting and inhibits head-in-pillow on BGAs. Is compatible with automotive applications.

Koki Solder America, www.kokiamerica.com

NanoProof PCB water and oil protection products provide surface modification technology; treat printed circuit board to be repellent to water and/or oil, while maintaining functionality. Surface treatments are no-mask, solution-based hydro/oleophobic coatings done on an inline basis; deliver benefits of conformal coatings and avoid bottlenecking batch process. Offer range of PCB waterproofing solutions from protecting against accidental water damage (NanoProof 1.0) to IPX7, immersion in water at 1m depth for 30 min. (NanoProof 3.0,3.5,4.0), to barrier properties that can withstand 100 hr. immersion in sweat solutions, and test methods developed for non-hermetic components (NanoProof 5.0) . Electrical connections are not impacted; integrity of signal strength, antenna and acoustic performance remains intact. Use a mix of Proprietary Transition Metal Complexate technology and fluorinated acrylic polymers to be compatible with common material types used in SMT parts.  Are sprayable or dip-based coatings; do not require a cure and reportedly have no impact on conductivity testing. Are available with UV tracer dye.

Aculon, www.aculon.com

Microfocus x-ray tube XWT-300-THE Plus is for 3D production testing and measurement. Has 300kV acceleration voltage and 50W target power. Developed for industrial computed tomography and measurement applications. Features internal cooling of transmission target and diamond-based transmission target that delivers intensity at acceleration voltages above 225kV. Permits JIMA resolution of 3µm with voltage range from 50kV to 300kV.

X-ray WorX, www.x-ray-worx.com

TGA 2 features XP micro- and XPU ultra-microbalances. Thermogravimetric analyzer measures up to 50 million resolution points down to 0.1µg for a 5gm sample weight. Reportedly guarantees reproducible results independent of environmental conditions. Each instrument can be configured according to requirements of intended use. Can be upgraded as needed.

Mettler Toledo, www.mt.com

DSC 3 uses a FRS 5+ DSC sensor with 56 thermocouples for thermal analysis. Reportedly provides high sensitivity and excellent temperature resolution. Is chemically resistant with a ceramic surface. Has a signal time constant of 1.8 sec. Sample robot can process up to 34 samples; can pierce lid of hermetically sealed aluminum crucibles immediately before measurement. Can start measurement with one click. Has touch-screen terminal without use of PC. FlexCal technology automatically applies correct calibration parameters to match specified heating rate, purge gas and crucible type. Options include combination of DSC with microscope or usage of photo calorimetry accessory.

Mettler Toledo, www.mt.com

JT-Q hot air station without extractor desk repairs all types of SMD, including large QFPs and PLCCs. Features two work modes, manual or program, to manage temperature and hot air flow. Can personalize more than 20 parameters, including activation mode of the tool: automatic, by button or by P-005 Pedal. Works with JT-TA heater and features a USB-B connector for software updates. Comes with JT-SD stand that guarantees auto-stop function when tool is at rest.

JBC Tools, www.jbctools.com

Platoshear S extra-strong cutter is engineered to trim higher gauge leads and wire without blade nicking or dulling. Cuts up to 15 AWG copper wire (0.06"/1.5mm). Is 50% thicker wire than Platoshear 170. Plato cutter uses shear cutting method, which reportedly requires 50% less operator effort; extends cutting life. Thin profile design is ideal for trimming hard-to-reach areas. Handles are cushioned; automatically spring back to original position after each use.

Techspray, www.techspray.com

JT hot air station repairs all types of SMD, including large QFPs and PLCCs. Features two work modes, manual or program, to manage temperature and hot air flow. Can personalize more than 20 parameters, including activation mode of the tool: automatic, by button or by P-005 Pedal. Works with JT-TA heater and features USB-B connector for software updates. Comes with complete extractor desk and JT-SD stand; guarantees auto-stop function when tool is at rest.

JBC Tools, www.jbctools.com

Newhorizon pulsed heat reflow soldering system is for flex to ceramic, component to printed circuit board, flex to PCB, wire to PCB, and leadframe to PCB. Uses Uniflow 4 pulse heated reflow soldering power supply; hot-bar reflow soldering system provides integrated heat process control. Includes pneumatic bonding heads and 2-D or 3-D thermodes, X-Y thermode planarity adjustment, electronic temperature and system control, and digital bond force readout. Features active integrated cooling for heavy duty cycle operation. Is mounted on an adjustable frame; includes front-rear linear slide and manual or pneumatic rotary tables. Process parameters are embedded. Options include optical plug-and-play alignment modules and an interposer module for both Kapton and Sarcon tape in manual and automatic configurations.

Amada Miyachi America, www.amadamiyachi.com

Vigon RC 303 is a water-based cleaning agent developed for the removal of baked-on fluxes in reflow ovens and wave solder systems.  Removes re-condensed fluxes and emissions from condensation traps and heat exchangers. Does not have a flashpoint; can be directly applied to warm surfaces and safely operated in wave solder systems. Is available in a 1L spray bottle, as well as 5, 25 and 200L containers.

Zestron, www.zestron.com