XF-731 (1 mil) and XF-732 (2 mil) label materials use a durable top coat chemistry that reportedly is resistant to harsh fluxes. Labels resist softening at elevated temperatures, do not yellow, and exhibit excellent abrasion resistance. Are thermal transfer printable, semi-gloss white polyimide label materials that use acrylic adhesive systems. Are designed to provide barcode tracking of printed circuit boards and electronic components.
Polyonics, www.polyonics.com
RW1210 rework system contains selectable operating modes that fully automate removal, placement, and soldering sequences. Includes enlarged board holder to handle printed circuit boards up to 430mm x 360mm. Comes standard with a 1.3 million pixel, split-vision CCD camera and a 15” 1080p high-res display. Joystick-controlled zoom with 230x magnification and high-brightness LED lighting provide superimposed views of component leads and PCB solder pads for alignment using ultra-fine X, Y, and Θ axis µm. Provides ±0.01mm placement accuracy for 0.3mm lead pitch µBGAs and delicate QFPs. Includes five hot air nozzles for components from 2 x 2mm to 55 x 55mm. Has 1200W upper and bottom heaters; 2700W, rapid IR underheater heats bottom surface of the PCB.
Manncorp, www.manncorp.com
VERSAMag high-magnification HD inspection system has a multi-axis, high-res camera that tilts and rotates for multiple angle inspection with an adjustable Z-height arm. Has magnification up to 96x and includes real-time video inspection, flexible working heights and intuitive controls. Is ergonomically designed and has measurement and annotation capabilities when paired with FSInspection software. FSInspection software enables operator to provide inspection, documentation and reporting. Operator can capture, annotate, store and share images.
FSInspection, www.fsinspection.com
PICO Toµch controller reportedly helps dispense exact, repeatable micro-deposits as small as 0.5nL at up to 500Hz continuous, with 1500Hz maximum bursts. Features intuitive touch screen interface for precise control of the valve. Can set precise operating parameters, such as ramp open and close and stroke control. Pulse time can be adjusted in increments as small as 0.01ms. Better slope control delivers more repeatable deposits, while preventing turbulence and air bubbles from entering the fluid.
Nordson EFD, www.nordsonefd.com
PICO Pµlse non-contact jet valve reportedly helps dispense exact, repeatable micro-deposits as small as 0.5nL at up to 500Hz continuous, with 1500Hz max. bursts. Can jet low- to high-viscosity fluids onto any surface, including uneven and tough-to-reach substrates. Has exchangeable parts; adaptable to a range of applications. Tool-free latch mechanism allows for easy removal of the fluid body.
Nordson EFD, www.nordsonefd.com
Disposable material path TS5624DMP diaphragm valve reportedly enables difficult fluids and pre-mixed two-part epoxies to be dispensed without frequent cleaning. Wetted area can be replaced in seconds, while the valve stays on the production line. Wetted parts are manufactured from black Polyethylene to prevent moisture and UV light from coming into contact with the dispense fluids. Dispenses low to medium viscosity fluids over a range of shot and bead sizes, down to a fraction of a µl. Has internal spring return; valves adaptable for use with Techcon Systems controllers. Seal-less valve design offers moisture-sensitive resistance. Diaphragm creates a barrier between the wetted parts and the air cylinder. Valve comes standard with a mounting bracket kit, valve air hose, luer lock fluid line, sample packet of DMP inserts and a dispensing tip selection pack.
Techcon Systems, www.techconsystems.com
Press Releases
- TechSearch International Analyzes Hybrid Bonding Developments and Panel Market Growth
- ECD Doubles Manufacturing Footprint to Meet Demand for SmartDRY Intelligent Dry Storage Systems
- RBB Partners with LogiSync to Enhance In-house Design Capabilities
- Indium Corporation to Showcase Precision Gold Solder Solutions at MEDevice Silicon Valley 2024