X-Mag machine vision station integrates a high-definition camera and monitor for sharp images at all magnification levels. Up to 96X magnification. Features auto-focus camera with manual focus override, tilting camera and 330° rotating camera arm. 
FSInspection, a division of Freedom Scientific, http://www.fsinspection.com/
ESD tape provides safety from ESD damage. Is made of three layers: two dissipating copolymer substrates on the outside and a conductive layer between them. Reportedly provides strong adhesion and meets or exceeds requirements of ANSI ESD-S20.20. Is non-charge generating; safe for all ESD applications. Is good for multiple uses and is available in sleeves of six.
CCI, www.Corstat.com
TR7007Q 3D SPI features high-speed "Stop-and-Go" imaging for accuracy and ease-of-use. Includes SPC analytics software.
Test Research, Inc. (TRI), www.tri.com.tw
TidyPen 60-second sticky stuff remover has an improved formulation for better cleaning effectiveness on almost anything sticky: glues, tapes, labels, most fluxes, some inks and many conformal coatings. Is said to be safe on plastics and gaskets as well as other materials of construction found on PCBs. VOC, GHS and REACH compliant. Dispenses cleaning fluid more quickly. Comes in two sizes: vending-machine sized and a larger box containing five tools.
Microcare, www.MicroCare.com.
Lumet P53 solder paste with SBX02 alloy is for LED package assembly on PET flexible circuits; provides low-temperature LED package on PET reflow capability, enabling the use of PET flex substrates. Enables the use of SAC or Maxrel solder-based die attach in package.
Alpha, http://alpha.alent.com/Markets/LED
20-2121 polyurethane plant-based potting, casting and encapsulating compound for electronic applications with low toxicity requirements. Is made from natural oil polyol instead of fossil fuel feedstocks. Meets FDA food contact requirements and contains no TDI, MbOCA or Mercury. Is said to offer little shrinkage or exotherm, alleviation of mechanical and thermal stresses on sensitive electrical components, limited stress on electronics with good elastomeric properties. Tensile strength of 2,000 psi and a tear strength of 119 PLI. It has a mixed viscosity of 2,000 cps at 25°C and a gel time of 20 minutes at 60°C.
Epoxies Etc., http://www.epoxies.com/try-adhesives.aspx
Press Releases
- 4FRONT Solutions Invests in Seica’s PILOT V8 NEXT Flying Probe Tester to Enhance Test Capabilities at DeLand, FL Facility; Mike Sementelli Comments
- FRANK Elektronik invests in high-precision SMT line with ASYS machines; Robert Both Comments
- SASinno Americas Opens State-of-the-Art Facility in Washington, Missouri to Support North American Manufacturers; Mike Young Comments
- ZESTRON Hosts Webinar on “Electronic Assembly Failures, Solutions and Lessons Learned for Long Term Reliability”