SFX Gang Test Module Kit consists of three basic modules for easy-to-integrate, parallel test or programming of up to 16 or 32 units. Requires one system controller. Can be flexibly adjusted to various environments and different test and programming applications such as flash programming, MCU programming or dynamic tests per Processor Emulation. Consists of three interconnected module types – a TAP transceiver, a multipurpose parallel I/O unit, and a power management unit. For simple system integration, all modules have onboard Mass Interconnect Interfaces from Virginia Panel, and are controlled by a central controller. Supports all modern technologies for Embedded System Access (ESA). In addition to boundary scan, these are Processor Emulation and chip-embedded instruments, for design validation, hardware debugging, production test, programming without probe or nail utilization (non-intrusive). Each site can be individually programmed in several parameters (protocols, voltage, delays etc.).
Goepel, www.goepel.com
Circuit Scribe rollerball pen comes filled with specially formulated conductive ink that dries instantly. Draws electronics circuits instantly. Produces lasts 60 to 80 meters of conductive lines. Conductivity is 50-100 milliohms per square per mil.
Electroninks Incorporated, http://www.electroninks.com/
ProtoLaser 3D has a large, height-adjustable working platform and a laser optic, which corresponds to ones used in production systems. Is for series-like 3D rapid prototyping and process optimization. Is based on the ProtoLaser concept, where working chamber is housed vibration-decoupled in a compact body.
LPKF, www.lpkf.com
ProtoLaser 3D has a large, height-adjustable working platform and a laser optic, which corresponds to ones used in production systems. Is for series-like 3D rapid prototyping and process optimization. Is based on the ProtoLaser concept, where working chamber is housed vibration-decoupled in a compact body.
LPKF, www.lpkf.com
Eexpert 10.6 rework system now comes with the Process Shuttle to streamline flux and solder paste dipping or printing, and pre-positions small surface mountable devices for pickup. Installs on Auto-Vision-Placer (AVP) systems. Features include µSMD Tool, which presents small components with an easy-access fixture, improving processing time. Specific sizes are engineered for optimal pre-alignment. Dipping Tool permits solder spheres on the underside of an area-array device to be coated with a controlled, defined volume of flux or solder paste. Different depths are available to yield specific depositions. Printer Tool permits solder paste or flux to be printed directly onto small components such as quad flat no-leads, enabling immediate placement onto a printed circuit board. Printing stencils can be easily changed to minimize process setup. Transport slide holds various shuttle tools, which feed diverse components to the rework process in a controlled manner.
Retrofits to existing Martin systems that have automated vision placement. Does not require software programming.
Martin, a Finetech Co., http://www.martin-smt.de
Eexpert 10.6 rework system now comes with the Process Shuttle to streamline flux and solder paste dipping or printing, and pre-positions small surface mountable devices for pickup. Installs on Auto-Vision-Placer (AVP) systems. Features include µSMD Tool, which presents small components with an easy-access fixture, improving processing time. Specific sizes are engineered for optimal pre-alignment. Dipping Tool permits solder spheres on the underside of an area-array device to be coated with a controlled, defined volume of flux or solder paste. Different depths are available to yield specific depositions. Printer Tool permits solder paste or flux to be printed directly onto small components such as quad flat no-leads, enabling immediate placement onto a printed circuit board. Printing stencils can be easily changed to minimize process setup. Transport slide holds various shuttle tools, which feed diverse components to the rework process in a controlled manner.
Retrofits to existing Martin systems that have automated vision placement. Does not require software programming.
Martin, a Finetech Co., www.martin-smt.de
Press Releases
- OKI Develops Ultracompact Photonic Integrated Circuit Chip Using Silicon Photonics Technology to Realize Various Optical Sensors
- AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Silicon Valley Expo & Tech Forum
- Occam Strengthens Leadership Team with Addition of PCB Expert Dana Korf
- ITW EAE Expands Partnership with Etek Europe to Represent Despatch Products in the UK and Ireland.