5R6-900 benchtop laboratory temperature controller has ramp/soak capabilities. Single enclosure device plugs into wall as a self-contained temperature control system. Can be used universally, wherever user is located. Solid-state MOSFET bidirectional compact unit features internal power supply and handles load currents up to 10A. PC programmable. Features digital display for controlling functions, including adjusting output voltage and setting the desired temperature. Auto output shuts down unit if sensor is opened or shorted.
Oven Industries, http://www.ovenind.com
NCM5000 dispense pump has two wetted parts -- a flexible diaphragm and nozzle plate -- and no seals or springs to replace or adjust, to simplify field operation. Uses a high-speed pneumatic solenoid to drive jetting action. Offers continuous frequency of up to 300Hz. Main body of pump has built-in non-wetted heater to maintain fluid temperature for consistent results. Priming volume is 0.09 cc, minimizing lost materials and maximizing production per fluid reservoir.
Replaceable diaphragm is impregnated with carbide ball and available in different materials for fluid compatibility. Nozzle plate can be configured with durable ceramic nozzles in a variety of sizes. Nozzles are field replaceable and require no adjustments once replaced. For UV encapsulants, underfills and SMT adhesives.
GPD Global, www.gpd-global.com
OhmegaPly MTR permits thin-film resistors to be built within a printed circuit trace less than 0.004" wide. Using standard subtractive printed circuit board processes, it is for high density interconnect designs where passive component placement is difficult.
Omega Technologies, www.ohmega.com
SmartHolder bracket is designed to keep SuperSaturated SmartWipes canisters accessible. Is made from spring steel wire that expands for loading and unloading. Has a white powder coat finish. Is equipped with wall mounting plate on the back side and a bench mounting plate located on the bottom side of the holder. Wall mounting plate comes with a 3" x 3" adhesive pad. Can be grounded with a ground strap.
JNJ Industries, www.jnj-industries.com
Scanflex Designer Studio boundary scan test system is for test and debug tasks in design and production stages. Hardware is preconfigured for use with embedded system access technologies such as ChipVORX and VarioTAP. Can be extended by additional I/O modules. Hardware/software bundle contains the Scanflex controller SFX/Combo1149-A and System Cascon Development Station software type Basic/SX, Standard/SX, or Standard with add-on option Scan Vision Layout.
Goepel electronic, www.goepel.com
4000 Optima Bondtester has a multifunction cartridge. Key pad features programmable nudge buttons for positional alignment. Includes dual vibration reduction mount and adjustable eye-line. Can include a camera through the microscope to record the test. Uses Paragon software, providing semiautomatic test routines, automatic GR&R calculation, database search engine wizard and data reporting.
Nordson Dage, www.nordsondage.com
Press Releases
- OKI Develops Ultracompact Photonic Integrated Circuit Chip Using Silicon Photonics Technology to Realize Various Optical Sensors
- AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Silicon Valley Expo & Tech Forum
- Occam Strengthens Leadership Team with Addition of PCB Expert Dana Korf
- ITW EAE Expands Partnership with Etek Europe to Represent Despatch Products in the UK and Ireland.