PullTester 325 and 326 models come in three force ranges. Standard models feature 200N, 1000N, 2000N (45 lbf, 225 lbf, 450 lbf); other ranges available by special order. Controlled by speed-regulated motors for test accuracy. PullTester 325 features two selectable pulling speeds with pull-to-break force test capability. PullTester 326 features four selectable pulling speeds and four test functions (Pull-To-Break, Pull + Hold, Pull + Return and Pull+Hold+Break), and networking capabilities and a memory capability for storing test parameters and test results for up to 48 different jobs and 50 test results for each job. Data can be collected and analyzed using optional WinCrimp software. Multiple holders and fixtures are available for both models.0
Schleuniger USA, http://www.schleuniger-na.com/en-us/products/pull-force-tester/
Temperature sensor probes, from thermistors and thermocouples to resistance thermometers, are offered in the “Temperature Sensor Selection Guide.” The guide shows tolerance level, model number, temperature range and key details about five sensors offered. Sensor probes are integrated with other PID temperature controller systems. Sensors have a tolerance of up to ±0.1°C. Each sensor can be customized.
Oven Industries, www.ovenind.com
ESD Audit Kit Model 511/1501 includes Ionizer Kit Model 511 Electrostatic Field Meter with charger and charge plate and Model 1501 Surface Resistance Meter. Is for electronics, flat panels, photovoltaics, plastic/polymer/film processing and semiconductors. Applications include air ionizer verification, electrostatic decay auditing and monitoring, testing of floor materials and systems, and resistance measurement (surface, volume, two-point) of work surfaces, static dissipative materials and seating. Model 511 Electrostatic Field Meter can operate at two ranges: 0 to +/-2 kV per in. or 0 to +/-20 kV per in.; reportedly obtains accurate measurements in ionized or non-ionized environments. Can be used for testing balance and +/- decay capabilities of ionizers. Complies with ANSI/ESD SP3.3. Model 1501 Surface Resistance Meter offers a measurement range from 10E+3 Ohms to 10E+12 Ohms. Complies with several IEC and ANSI/ESD standards.
TREK Inc., www.trekinc.com
YSD SMT dispenser has a tact time at 0.07 sec./shot Performs a variety of dispensing functions in addition to temporary adhesive application. Handles PCBs up to 510mm in length and 460mm in width. Meets CE marking requirements. Compressed air level 0.45 MPa.
Yamaha Motor Co., www.global.yamaha-motor.com
Plato XT soldering tips come in 19 different styles. Are compatible with Weller WX stations using WXP120 iron. Tip geometries include conical, screwdriver, bevel, knife, and SMD flow tip.
Two new sponges fit Hakko FX-888 and FX-888E stations. Slitted sponge is designed to capture solder while wiping off tip. Sponge with the large hole adds surface area for wiping. Both are made of cellulose.
Techspray, www.techspray.com
This ultra-compact probe pin enables fine pitch, versatile contact shapes, and a multiple contact point configuration; can handle a high current load. Created a flat structure with electroforming technology; reportedly can place pins at any angle. Can use a general cylindrical socket housing.
Omron, www.omron.com
Press Releases
- OKI Develops Ultracompact Photonic Integrated Circuit Chip Using Silicon Photonics Technology to Realize Various Optical Sensors
- AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Silicon Valley Expo & Tech Forum
- Occam Strengthens Leadership Team with Addition of PCB Expert Dana Korf
- ITW EAE Expands Partnership with Etek Europe to Represent Despatch Products in the UK and Ireland.