UCM3070 boundary scan plug-on module is for the Agilent utility card of Medalist i3070 Series 5 in-circuit tester. Combine Agilent’s in-circuit test with Goepel boundary scan test in one machine.  Is generated with System Cascon software. Can be fitted on the utility card, which communicates with the host system via USB and is based on Scanbooster architecture for test clock of up to 16 MHz. The validated plug-on card enables boundary scan test with two test access ports (TAPs 1.8 V to 4.5 V), eight parallel interface ports for faster flash programming and optional analogue channels. Includes self-test of the device in hardware package.

Agilent Technologies, www.agilent.com
Goepel Electronic, www.goepel.com

4-mm ITF3 feeder is for A-Series pick-and-place machines. Reportedly improves reliability of 01005 component placement. Accepts W4P1 all-plastic tape standardized by the IEC; tape eliminates paper dust that can cause bad solder connections to the micro-miniature components. Is static-free. Helps cut waste by 75% compared with traditional 8-mm tapes on a 2-mm pitch.

Assembléon, www.assembleon.com

1-2577 silicone conformal coating is for use as a PV cell and module coating. Offers abrasion resistance and good dielectric properties. Cures with a hard slick surface, and is Mil spec and UL-approved. One-part RTV also contains a UV indicator and adheres to metal, aluminum, ceramic and plastic. Comes in bottles, pails and drums.

Dow Corning, www.dowcorning.com

Tridak Model 775H heated valve dispenses heavy, stringy, temperature-sensitive, or reactive materials. Is a pneumatically operated spool valve supplied with a temperature controller and thermocoupler. Heats material being dispensed from ambient up to 350°F. Can dispense volumes as little as 0.01 mL; provides continuous, adjustable and lockable flow. Offers an adjustable and lockable suck-back control. Can be supplied with special nozzles or manifolds. When heated, the valve can be used alone or as part of a complete heated system. Used alone, it lowers the viscosity of the material only at the dispense point.

Tridak, www.tridak.com