McDry Signal Tower with ERC-301AD hygrometer with an alarm system and a wireless temperature/humidity data logger are for McDry electronics drying storage cases. A light signal flashes and an audible alarm sounds when humidity level goes over the set limit for a fixed period of time. After the alarm flashes, the unit saves 10 data readings: one per hr.  The data logger permits viewing and tracking of temperature and RH levels within the cabinet to ensure safe storage of moisture-sensitive components and materials. Export data to Excel. No nitrogen needed; humidity is removed by use of a zeolite desiccant, which is recycled automatically and does not require replacement.

Seika Machinery Inc., www.seikausa.com

Dual-Cure 9481 reportedly cures in seconds upon exposure to UV/visible light and has a high-cured durometer. Is low viscosity. For spray application through manual or automated dispensing. Flow characteristics for fast coverage without migration to areas where protection is not needed. Adheres to PCB surfaces. Cured coating forms a transparent layer that protects from moisture, dust and other contaminants.  Cure cycles are typically fewer than five sec. Meets MIL-I-46058C and IPC-CC-830B. 

Dymax Corp., www.dymax.com

SOL9400 Series front-side silver pastes are for crystalline photovoltaic cells. Are improvements over SOL9235H; have higher efficiency and faster throughput.

Heraeus, www.heraeus.com

The 8th Generation model 2800 manual universal programming system combines the speed of Vector Engine Co-Processor technology with universal device support. Supports microcontrollers, NAND flash, NOR flash, serial flash, managed NAND flash, E/EPROM, flash EPROM and other technologies with densities up to an 8 Eb theoretical limit. Supports devices with voltage down to 0.7 (Vdd). Accelerates waveforms during the programming cycle. Has the capability to program with one, two, three or four socket cards. Offers a single socket card purchase for first article qualification.

BPM Microsystems, www.bpmmicro.com