Nonlinear vector network analyzer is for the PNA-X microwave network analyzer. Features nonlinear component characterization, nonlinear scattering X-parameters, and nonlinear pulse envelope domain capabilities. Can measure the calibrated amplitude and cross-frequency relative phase of measured spectra from 10 MHz to 26.5 GHz. Component characterization is enabled by measuring and displaying both the amplitude and phase of the full spectra in the PNA-X network analyzer. Data can be displayed in time, frequency, power or user-defined custom domains.
Agilent Technologies Inc., www.agilent.com/find/nvna
The Reprint R23 Semi Automatic Screen Printer is designed to take stencil sizes up to a max. of 23". Has Windows-based interface. Large pad areas, BGAs and 01005 pad sizes are said to be easily handled. Features include 23" standard frame; closed loop servo motion control; dual squeegee print carriage; vertical motion profile for stencil/PCB separation; interlocks incorporated for safe operation; twin camera vision system for ultra-fine pitch printing; Mylar alignment aid, and a 17" LCD TFT flat screen monitor.
Reprinted Ltd., www.reprintservices.co.uk
The EL environmental enclosure is 27" x 27" x 45". Reportedly provides a stable test environment by blocking energy emitted by ambient environment and blocking air currents generated by heating and A/C ducts. A motorized camera slide and controller position camera for model board comparison and short circuit tests. Has platform with adjustable PCB mounts. Board sizes up to 22" x 20". Detects and locates PCBA defects, such as short circuits and stressed components; can be used to verify PCBA functionality.
OptoTherm, Inc., www.optotherm.com
OptoTherm, Inc., www.optotherm.com
Eco-Plus S03X7C-56M Pb-free wire is said to reduce or eliminate flux splatter, joint overheating and solder tip erosion and carbonization, while also improving wetting and solder joint strength. Reportedly reduces tip consumption caused by traditional Pb-free wires.
Adtool Corp., www.adtool.ca
The ProcessMate PM100 vacuum pickup system lifts and positions small or delicate parts in benchtop assembly processes. Designed as a pick-and-place tool for use with Performus fluid dispensers; permits positioning of parts with one hand and application of adhesives, solder pastes and other assembly fluids with the other. Both use the same size cabinet. Options include a double foot pedal that controls the dispenser and vacuum system, and a finger switch for manual operation.
EFD Inc., www.efd-inc.com
EFD Inc., www.efd-inc.com
SR-37 LFM-22S no-clean cored solder wire is said to enhance cost-efficiency and yield through a range of tip-saving properties. For applications that don’t require silver.
Almit, www.almit.com
Almit, www.almit.com
Press Releases
- AIM to Present on Micro/MiniLED Applications at Hangjia Talk in Shenzhen, China
- Indium Corporation Receives Business/Industry Partnership Award by NYCCT
- Libra Industries Expands Powder Coating Capabilities at Guaymas Facility
- Scanfil and Etteplan Improve Product Life Cycle and Manufacturability with Redesign