An updated Model 5500 Benchtop Stencil Printer reportedly provides vertical separation of the stencil from the PCB prior to the lifting of the stencil frame. Includes tooling for double-sided boards and dual squeegees mounted to linear slide bearings for side-to-side squeegee motion. Includes squeegees with stainless steel blades and rubber blades. Self-locking dial adjustments permit X, Y, Z, and R axis settings. Maximum print area is 500 x 550 mm, and maximum frame size is 600 x 600 mm. Net weight of approximately 165 lbs.
 

These electrostatic dissipative workstations are certified to meet specific electrical property requirements; said to ensure static dissipation at a safe rate. Pedestals and workbench components can be protected by static dissipative powder-coat finishes available in three standard colors. Feature work surfaces and shelves with static dissipative plastic laminate; have ground bolts with a 12' grounding cord. Can be configured in a variety of heights and lengths, with cabinet pedestals and/or legs.

Lista International Corp., www.listaintl.com

The X3 3-D x-ray system inspects PCBs with BGAs and other hidden solder joints. Gathers multiple oblique images to construct a rendering used in identifying solder and component-related defects on both single and double-sided boards. Selectively uses 2-D or 3-D to inspect specific regions. Permits discrimination between top and bottom sides of boards. A typical inspection program is said to be created in fewer than 45 min. Reportedly is suited for inline or offline applications. Has remote programming and real-time SPC software.
 

Slic Blade line squeegee blades are said to form a surface with low surface energy. Provide 100% electroformed nickel. Solid electroformed nickel reportedly will not chip or flake. Are said to provide lowest wiping pressure and longest blade life; enhanced stencil life and the least stencil damage. Eliminate solder paste sticking and shearing against the blade.
 
Fine Line Stencil, www.finelinestencil.com