Mega Ion solvent cleaning system is compatible with DI water, water alcohol mixtures, pure alcohol, evaporative hydrocarbons (like cyclohexane), commercial solvent blends (like Axarel 2200) and vapor degreasing solvents like (TCE or NPB). Wash and rinse cycles incorporate a spray under immersion process with strategically located venturi nozzles for cleaning efficiency. Agitation can be controlled to handle sensitive wire-bonded substrates or difficult to clean, tightly-spaced flip chip technology. Process chamber is always empty when not in use and must be closed and latched before cleaning cycle begins. for added safety. Automated solvent replenishment ensures operator is never in contact with wash fluid during normal operation. Process tank drains to integrated holding tank at a controlled rate to minimize drag-out. Ionic testing is based on ROSE, for quantifying ionic contamination of the circuit board after or before cleaning. Unique regeneration system increases bath life by removing flux, finger soils and other manufacturing soils from the wash solution without heat or condensing coils. Is said to maintain solvent purity levels at a higher standard than the solvent as received from vendor. Closed-loop environment with wash bath life maintained through the use of an integrated ionic exchange filter system. Provides “Pass or Fail” indication for IPC J-STD cleanliness limits for finished assemblies.

Austin American Technology, aat-corp.com

SSA3000X digital spectrum analyzers include two models with frequency ranges from 9kHz to 2.1GHz and 9kHz to 3.2GHz, respectively. They incorporate all-digital Intermediate Frequency technology. With IF technology, frequency conversion and filtering are accomplished with digital signal processing. Include a 10.1" 1024 x 600 resolution WVGA display. Minimum resolution bandwidth (RBW) is 10Hz; average noise level displayed is -161 dBm/Hz; offset phase noise is -98 dBc/Hz @10 kHz, and total amplitude accuracy is < 0.7 dB. Initial calibration accuracy is < 0.2 ppm. Options include tracking generator, advanced measurement package, EMI measurement function with quasi-peak detection, and reflection measurement kit.

Siglent Technologies America, www.siglentamerica.com

551.10 desktop reflow soldering oven is 2010mm long and 790mm wide. Has four top and four bottom heating zones. Conveyor speed is and capable of speeds up to 90cm/min., with a typical speed of 20cm/min. Active heating chamber is 850mm. SMEMA, PCB and WLAN communication interfaces. Integrated one-channel profiler; three-channel external temperature profiler optional. Also comes in 551.19 model, which is 3109mm long and 850mm wide with a 2125mm long heating chamber with a typical speed of 45cm/min.

SEF Systec, www.sef.de

RP 6 batch reflow oven handles boards from 10mm x 10mm to 300mm x 200mm. Low power consumption. Steady state (100⁰C) energy consumption of 0.5kWh. Produces radiant heat by IR heaters and convection heat by radiators. Integrated temperature profiler with three channels. Max. reflow temperatures of 280⁰C to 300⁰C on the PCB. 230V power supply; can also operate with optional 400V. Optional nitrogen supply reaches residual oxygen values of less than 50ppm. 750 x 650 x 440mm footprint.

SEF Systec, www.sef.de