The redesigned RD2 Batch Vapor Phase Reflow System offers enhanced profiling capabilities with a convected preheat zone and three vapor preheat settings. Energy use reportedly has been reduced by 30% and the fluid fill requirement has realized a 40% reduction over the previous model. Features onboard working fluid filtration, as well as an auxiliary holding tank. Three-level password protection and a full graphics touch screen OIT have been integrated. Provides consistent, uniform and reliable heat transfer. Has a working envelope of 18" x 15" x 2.5"; features a palletized conveyor system that keeps the product horizontal throughout the process. Accommodates medium volume multi-shift production and medium to large sized products.

R&D VaporTech, www.rdvaportech.com  

R Series 4-axis system is designed specifically for automated fluid dispensing. Proprietary TeachMotion software offers a simplified user interface for faster setup and ease of use via a Teach Pendant, enabling programming of complex dispensing patterns, such as dots, lines, circles, arcs, compound arcs, and patterns on different planes, in minutes. Repeatability is +/-8 micron/micrometer), and has built-in tip recalibration, and true 3D motion control. 

Nordson EFD, http://www.nordsonefd.com

RF550 Rework Flux is a high-reliability, zero-halogen, no-clean rework flux designed for electronic component rework and repair applications. Has a gel-like consistency and is packaged in syringes. Can be dispensed onto specific areas that require flux. After being dispensed, it stays in place until soldering. Has excellent performance in applications requiring high reliability. Is reportedly ideal for QFP or BGA semi-automated rework applications and through-hole repair.

Kester, www.kester.com

NF372-TB Flux-Pen is a zero-halogen, no-clean, low solids flux for rework of conventional and surface mount printed circuit board assemblies. Passes IPC SIR testing in a raw or unheated state; can be used in rework applications, specifically those with high-reliability requirements. Residues are minimal, clear and non-tacky.  Is classified as ROL0 flux under IPC J-STD-004B.

Kester, www.kester.com