SCPH silver conductive adhesive offers electrical conductivity and adhesion to most substrates, especially indium tin oxide and color filter substrates. Is reportedly not dissolved by Tuffy conformal coatings, which are frequently applied to the electrodes of flat panel displays. Can be coated with Tuffy alternately to simplify the assembly process. Can be used with fast-action, automatic dispensing equipment and cures at ambient temperatures within 10 min. Is halogen- and antimony-free, and requires no special storage conditions. For assembly of cellphone display modules, tablets and similar products that incorporate flat screen displays.

Electrolube, www.electrolube.com

GLRS laser singulation system is configurable with a near IR laser (1032nm) for use with metal-core substrates or a green laser (532 nm) for use with ultra-thin and flexible substrates. Inert gas injection at the Laser point minimizes local oxidation concerns, Particle/Gaseous remediation is affected from beneath. Vacuum is provided via two 5HP blowers and a three-stage filtration system capable of handling particles as small as 20 microns.

Getech, www.getechsys.com

LineMaster DM inspection machine has dual mode capability; incorporates SPI and AOI. Validates overall variables associated with component placement and solder paste printing. Detects absence/presence, polarity, OCV, misalignment, RDI and solder joint inspection for AOI and accurate and repeatable 3D volumetric measurements for SPI. Features include real-time SPC, customized data reports, offline CAD/Gerber programming and a defect repair station.

ASC International, www.ascinternational.com

MC-301 benchtop reflow oven is for prototyping, manufacturability testing, and short-run batch production. Has an Android-based control app; permits surface mount assemblers and product developers to meet specifications for preheat, soak, reflow, and cooling phases. Heating and cooling rates in each stage are automatically calculated. Includes internal thermocouple to measure and record actual temperatures on the printed circuit board while soldering. Real-time feedback from the thermocouple can be used to control heater power and to establish temperature settings. Heating chamber is divided into multiple heating zones; each one is assigned to its own channel of the temperature control system. Ensures delta-T ±2 °C across 10" x 8" working area. Rapid cooldown is achieved with intake fans that draw air through the bottom of the unit and out through the 3" exhaust port. Measures 27" x 19" x 11" and weighs fewer than 100 lbs.

Manncorp, www.manncorp.com