Circuits Assembly Online Magazine - New Products

New Products

Uni-Cyclone centrifugal mixer/defoamer is capable of programming duration, cycle profile and up to 1500 RPM centrifugal speed, as well as internal rotational speed. Can be used for solder paste, semiconductor materials, solar pastes, epoxies, and other materials. Mixing of materials and defoaming reportedly accomplished with cycle times half of conventional mixers. Can be controlled from a PC with complete traceability of every program.

Japan Unix, www.japanunix.co.jp/ju_en/index.html

No. 1012 electrically heated, 500ºF top-loading oven is for testing electronics equipment. Two zones, each 96" x 12" x 12", can be separated for use as independent ovens. 24 KW (12 KW per load) are installed in Incoloy-sheathed tubular heating elements. Two 1/3-HP recirculating blowers provide a total horizontal airflow of 1200 CFM to the workload. Features 4" insulated walls, aluminized steel interior and exterior, manually operated rear hinged door, reinforced flooring that can accommodate a load up to 500 lbs., and swivel casters with swivel lock and wheel brakes. Controls include digital indicating temperature controller, manual reset excess temperature controller with separate contactors, and recirculating blower airflow safety switch.

The Grieve Corporation, www.grievecorp.com

AOI software v.5 now includes 64-bit computing technology, standard 12 Gb of memory (expandable to 72 Gb), and integrated 3D Gerber translation; reportedly can generate production-ready 3D inspection program from stencil data within 5 min. Specifies stencil thicknesses and step stencil data in a wizard-driven environment. Inspection parameters are set automatically based on user input. Gencad and Gencam handling permit mapping individual components and lead numbers to Gerber data.

Machine Vision Products Inc., www.machinevisionproducts.com

Spectra is a large-board AOI built on the design of the Supra and Ultra series. Uses a tri-linear stage and comes in two formats. Is capable of inspecting boards up to 24" x 24". Spectra XL is capable of inspecting up to 24" x 36".

Machine Vision Products Inc., www.machinevisionproducts.com

GenesisSC blends flip-chip assembly capabilities on a Genesis platform. Reportedly provides a complete solution for any production environment. Is tailored for dies and passives placement, including 300 mm wafers. Placement accuracy is said to be ±10 µm @ Cp>1. On-board linear thin film applicator provides dipping capabilities for paste or flux.

Universal Instruments Corp., www.uic.com

LK-G5000 laser displacement sensor comes with RS-CMOS sensor for a 392 kHz sampling rate said to be 8 times faster than previous models, ±0.02% full scale linearity and 0.01 µm repeatability. Is smaller than previous models. Active Balanced Laser Control Engine control is more powerful, and balances laser emission time, laser power, and gain. Dual-port data transfer, using a quad speed clock, enables pixel data to be transferred eight times faster than conventional models, thus simultaneously achieving high-speed and high-resolution. HDE (High Definition Ernostar) lens, together with twice the pixel resolution, results in highly-defined received light wave patterns. Three selectable built in algorithms improve the application solving potential. Perform calculations for up to 12 sensor heads for flatness, warpage and multi-point thickness. Measure speed and acceleration while measuring displacement.

Keyence Corp. of America, www.keyence.com/prlk5