Paragon bond testing software provides flexible analysis, high-accuracy and repeatability of test data. Monitors all aspects of bondtester: life tests on the tool, load cartridge, calibration jig and health checks. Has a configurable interface. Includes accessible test setup parameters, a checklist enabling quick start; semi-automatic test routines, and a database search engine wizard. Data presentation is enhanced by charting functionality; several graphs can be displayed at once, including camera images. Reportedly guarantees consistency of test data; includes failure mode grading.

Nordson Dage, www.nordsondage.com

Sarcon GR-Tac is a 0.25-mm thick polyester reinforced thermal interface material.  Is reportedly easy to install and typically does not require adhesive; ideal for applications where surface space and textures vary. Is suited for low- and high-volume production runs. When placed between a heat source and a nearby heat sink, Sarcon TIM will transfer heat with a thermal conductivity of 1.5 W/m°K and a thermal resistance as low as 0.33 °Cin2/W. Polyester mesh construction is ideal for most die-cut installations.  Is available in sheets up to 300 mm x 200 mm.

Fujipoly America Corp., www.fujipoly.com

Reflow Oven Cleaner is a formulated micro-emulsion for cleaning reflow ovens and wave solder machines. Is a nonflammable, low toxicity and odor solvent for removing all types of flux residues. Is said to prevent buildup of condensed flux residues. Can be used at temperatures of 20°-50°C, with an optimum working temperature of 40°C. Contains inhibitors to prevent corrosion to both ferrous and non-ferrous metals and is compatible with most plastics. Also suitable for many general degreasing applications.

Electrolube, www.electrolube.us.com

TimingDesigner 9.25 has enhanced Automerge functionality said to dramatically speed interface timing analysis. Permits use of reusable, model-based approach to timing analysis. Connects component timing models to create parameterized interface diagrams that can be used to validate timing and interactively test design alternatives. Interface models can be created early in the design phase to help drive constraint definition and timing budgeting. Propagation delay and signal integrity effects can be added for a more accurate representation of timing margins. Optional TimingDesigner Design Kit Library, for automated analysis process. Also updates Allegro PCB SI flow and features new design validation commands to identify critical margins, ensure proper analysis, and determine timing closure.

EMA Design Automation, www.timingdesigner.com/whatsnew