2900 Universal Production Programming System offers fast programming speeds and true universal device support. Programming speed of up to 100MBytes/s for MCUs, eMMC, NAND, NOR and serial flash. Downloads image files up to 25MB/s to all programmers simultaneously. Memory support of 512Gb. Connects up to 15 units in one job session, for high-density volume production. Features 240 pin drivers, to support a range of devices on the same socket. Ultra universal site and socket technology streamlines first-article and production programming. Is compatible with existing 7TH and 8THGEN socket cards and algorithms.

BPM Microsystems, bpmmicro.com/pr

ogrammers/manual-programmers/2900-2/

QuickLink twist-to-lock compression mount connector replaces surface mount connectors that require a receptacle on the PCB. Mounts directly to the PCB with a twist-to-lock footprint design that requires two small through-holes and a gold pad for the connector to land on. Footprints reportedly can be placed anywhere on the board to permit access to any channels from the device without having to solder on SMA or SMP surface mount receptacles. Low loss to 70GHz; meets bandwidth requirements of PAM4 signaling and Ka/Ku band applications. No threading or tools required.

Ardent Concepts, ardentconcepts.com

PanaCIM Enterprise edition 10 software has new features that bring greater control and functionality to line or floor levels to eliminate single points of failure, permit line-by-line upgrades of equipment and software, and add versatility because they are hot-swappable. Additional advantages include new data storage options, expansive asset maintenance management, process connectivity for factory-wide work-in-process control, digital documents to complement labor skill sets, and a dynamic knowledge base for easier recovery.

Panasonic Factory Solutions Co. of America, www.panasonicfa.com

UniXact fully automated dispenser is a single source system for thermal interface management (TIM), bonding, potting and gasketing applications. Features Cartesian XYZ motion. Is a single source for motion, fluid dispense and process monitoring. Is for dispensable materials used in the production of consumer and automotive electronics. Handles high viscosity, highly abrasive materials, and is capable of handling a wide range of 1K and 2K materials. Programmable at the machine or offline.

Graco, graco.com/unixact

4040 vapor phase soldering system installs in virtually any workspace, without need for complex ductwork and external venting. Efficient heat transfer and gentle conditions are said to generate minimal exhaust that is easily managed by any low-cost, self-contained, fume extraction system. Power rating of less than 3kW (75 to 80% less than small convection ovens). Multi-chamber design and automatic board handling system. Illuminated processing chamber includes 14" viewing window and is completely isolated during soldering. Fluid recovery system collects and filters condensate during cooldown. Cycle times range from 6 to 9 min. or less. Extra-large (18" x 16") work holder for batch soldering of multiple boards. Soldering programs can be created automatically in seconds, without profiling. Thermocouple connector accessory monitors actual board temperature throughout soldering cycle, for fine-tuning soldering programs can be fine-tuned for increased efficiency and energy savings. Thermal profile data can be recorded, saved and exported through built-in SD card slot, for SPC traceability.

Manncorp, manncorp.com/4040-vapor-phase-soldering-system.html

Dual-Simultaneous Programmable Pitch is for Select Coat SL-940 conformal coating. Two of the same conformal coating applicators are installed and operate simultaneously, coating two parts at the same time. Automatically repositions applicators to match programmed pitch. Reportedly reduces conformal coating process time by 50%. The pitch is programmed and will adjust automatically. Easy Coat software lets user program when to use one or both applicators.

Nordson Asymtek, www.nordsonasymtek.com

EMS 561-338 conductive adhesive for die-attach applications with small to medium size die is designed to cure in less than 1 min. at 150ºC. Is stress-absorbing to withstand thermal cycling and has conductive stability. Applicable by stencil printing or needle dispensing.

Engineered Material Systems, emsadhesives.com

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: pcbwest.com

NPM-VF is a dual-gantry, multi-head, odd-form placement and insertion machine. Achieves 4,500cph throughput within narrow footprint of a compact SMT mounter. Standard vacuum nozzle handles a gamut of packages and three additional process heads available for components up to 130x35mm and 60mm tall, requiring 100N force (nearly 22.5 lbf). Has a body chuck for gripping large odd-form devices without a pick surface (e.g., power transformers), lead chuck for gripping through-hole devices (e.g., electrolytic capacitors), and swing nozzle for inserting through-hole devices oriented in packaging other than insertion orientation. Tenders myriad feeder types from bowl feeders to stackable stick, through-hole, vacuum-formed/JEDEC trays, and tape feeders up to 104mm. Active clinch system secures various through-hole lead diameters at multiple rotations. When not required, clinch doubles as localized board support for snap-in/press-fit components.

Panasonic Factory Solutions Company of America, www.panasonicfa.com

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: pcbwest.com

TF 1800 BGA/SMD rework system incorporates top-side inductive-convection heater, which provides rapid heat-up and active cooling of solder joints. Inductive-convection technology allows for an active cooling feature, which provides controlled component/PCB cool down directly through the nozzle. High-efficiency, low thermal mass design reportedly takes less power to operate and is more reliable than conventional heaters. Stepper motor drives automated reflow head. Has 28µm (0.0011”) placement accuracy. Vacuum pick/shaft design with optical sensor is counterweight balanced. Includes adjustable height bottom-side IR preheater. Other features include HD vision overlay system for optical alignment with quad-field imaging capability for placement of outsized BGAs or large fine-pitch QFPs and an integrated underside board support wand to prevent warping during reflow.

Pace Worldwide

paceworldwide.com

Vigon N 680 pH neutral defluxing agent targests low-standoff component cleanliness. Developed for use in spray-in-air inline and batch equipment. Is based on micro phase cleaning technology and is aqueous-based. Removes range of electronic assembly flux residues. Reportedly provides excellent material compatibility, particularly with sensitive metals such as copper.  

Zestron, www.zestron.com

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: PCBWEST.COM

ThermoActive Suite Plus dynamic profile software is for rework process control. Is capable of self-adjusting thermal output to reach safe reflow temperatures automatically. In Auto Profile Mode, software responds by increasing or decreasing top heat relative to the environment, ramp rate and temperature limits. Has six general profiles; automatically adjusts wattage required to achieve high-yield small, medium and large PCB rework. Features precision targeting of visible focused IR. Doesn’t induce laminar hot air flow or heat migration issues with adjacent components. Eliminates touchup rework. Precisely measures and controls actual IC temperature. Senses and reacts to component temperature vs. heater core temperature. Displays solder sphere temperature, time above liquidus, and overlays multiple data points. Has component placement accuracy of 5µm. Incorporates parallax reduction 1" cube technology.

PDR Americas, pdr-rework.com

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: PCBWEST.COM

Jewel Box Oversize x-ray system is for inspecting backplane and LED panels. Accommodates 24" x 24" panel and positioner can fully scan 23" x 12". Compact footprint requires minimal floorspace and is on wheels for ease of movement throughout the facility. Provides up to 500X geometric and 2,000X electronic magnification, five-axis positioner with 360⁰ and 45⁰ and optional GTI image processing software.

Glenbrook Technologies, glenbrooktech.com

Register now for PCB West, the Silicon Valley's largest trade show for the printed circuit industry, taking place Sept. 13-15 in Santa Clara: pcbwest.com