The iPAG integrated paste and glue dispenser module is production ready and can be integrated within EKRA's high-end printers. Comes with single or double heads, permitting glue, solder paste or both to be applied to substrates after printing.
 

The SonoDry 1000 spray drying system has a nonclogging ultrasonic spray nozzle. Is said to be suitable for aqueous/aqueous and solvents/solvents feeds. Features an ambient drying temperature of 250°C, accuracy of ±1°C (steps of 0.1°C through PLC) and an air heater capacity of 1.8 kW. Has a blower capacity of 120 Nm3/hr.; 0-250 mm of water column vacuum and a feed pump capacity of 1600 ml/hr. with a 2 mm ID tube controlled through PLC. Weighs 90 kg; is portable on wheels and has dimensions of 650 x 1625 x 55 mm. Three models are available: SonoDry 750 Twin Cyclone Table Top System, with a water evaporation rate up to 750 ml/hr; SonoDry 1000 Twin Cyclone Mobile Stand-Alone System, with water evaporation rate up to 1000 ml/hr; SonoDry 1500 Advanced Twin Cyclone Mobile Stand-Alone System, with water evaporation rate up to 1500 ml/hr. Sizes range from small tabletop R&D systems to advanced floor models.
 
Sono-Tek Corp., www.sono-tek.com  
 
 

The Slice-Filter-Technique is for double-sided PCB solder joints inspection. Complete object information is included. Is based on an image-processing algorithm that separates image data of the printed sides. Uses pattern matching methods for solder joints and components. Is for prototypes and small batch production. Can test and verify the complete batch or complete series of the product type for the upper side and bottom part. Comes on all MatriX X2 and X 2.5 series models; is offered as upgrade package for the previous MX model. Designed for an inspection area of up to 460 x 350 mm and a variable inspection window of 10 x 10 mm to 30 x 30 mm. Reported resolution to below 5 µm; inspection time is 4 images/sec.
 
MatriX Technologies, www.m-xt.com
 

The Firefly laser-based selective soldering system includes a new automatic development environment said to reduce program time. Improved algorithms and faster loop control reportedly enable automatic management of PCB characteristics and environmental factors. X-Y-Z control of the laser head enables control of the position of the laser beam, rotating it 180° around the pin or joint to be soldered.

Seica S.p.A, www.seica.com 
 

Reztore hand lotion is a clean, unscented formula in an 8 oz. squeeze bottle. Contains no fragrance or dyes. Is said to contain no silicone or other chemicals that may contaminate and cause solderability problems and corrosion of electronic components. ESD-dissipative formula. Will not insulate skin. Reportedly helps provide reliable path-to-ground when using proper grounding devices such as wrist straps or gloves. Helps lower skin electrical resistance. Contains vitamins A, D, E and aloe vera. Surface resistance is 106 ohms.

Menda, www.mendapump.com
 

PicoDot Jet dispensing system deposits controlled amounts of fluid on hard-to-access areas, uneven surfaces, or in applications where a conventional dispensing needle cannot be used. Does not contact substrate. Speeds up to 150 dots per sec. Multiple configurations make it possible to dispense a variety of low, medium and high viscosity fluids. Capabilities include noncontact jetting, including 3-D substrates; covering areas with droplet arrays, with shot size starting at 0.002 µl (2 nl) to flow rates up to 300 g/min. (10 oz./min.); optional precision needle adapter; integrated heater.

EFD Inc., www.efd-inc.com
 
 

 

The CT23NP inline PCB router combines fast, low-stress depaneling with an easy programming feature using Windows XP image processing software. A turntable permits one board to be cut while another is uploaded at the same time reducing tact time. Flexible vacuum pickup and fixture permits depaneled board and waste to be unloaded simultaneously and safely. Other standard key features include automatic alignment by CCD camera, efficient dust collector, extended bit life and safety door. 
 
Sayaka/Seika Machinery, www.seikausa.com
 

 

The JB1113-LF liquid dispenser now conforms to RoHS requirements. Features include timed pulse shot and continuous mode operation. Regulated air output controls the air pressure to syringe or valve and the vacuum snuff-back feature helps prevent any dripping or post dispense ooze. Air pressure, time and tip size are provided in the kit.

I&J Fisnar Inc., www.ijfisnar.com

The XPM2+ reflow system contains enhancements to the conveyor, cooling, and electrical control system, as well as the software and user interface. Legacy thermal profiles are said to be directly transferable. Reportedly has excellent thermal transfer, resulting in minimal ΔTs, robust process control, and flexible cooling packages. The heater technology has not changed.
 
Vitronics Soltec, www.vitronics-soltec.com