The Verifier H Series horizontal beam x-ray inspection system is for industrial, automotive and medical applications. Provides assessment and defect detection of components and assemblies such as inkjet cartridges, automotive sensors, castings, electronics modules and electromechanical devices, and medical assemblies. The four-axis, 360° sample manipulator reportedly provides unlimited viewpoints. Is offered in configurations of 75kV (FSX-H75) for general-purpose applications or 90kV (FSX-H90) for applications requiring additional power. Comes standard with a PC-based VIP image processor.
 
FocalSpot Inc., www.focalspot.com

The Spectrum S-920 series of scalable dispensing features software and hardware control based on Fluidmove XP software with process control features. Rapid response heater system reportedly minimizes startup time and delivers uniform heat across entire part surface. Controlled process heat software can be added. Includes programmable fluid and valve pressure, mass flow control, calibrated process jetting, and a digital vision system. Can be configured with single or dual lanes, and one to three heat stations. Platform can be upgraded and configured to meet dispensing requirements. Uses noncontact jetting technology for applications such as stacked die underfill, chip scale package underfill, and UV gaskets for LCDs. Reportedly dispenses into 200 µm gaps; offers dispensing with flow rates up to 500 mg/sec. and shot rates up to 200 dots/sec. Footprint is 600 x 1321 mm with a single heat station, 850 mm x 1321 mm for two heat stations, and 1100 x 1321 mm for three.
 
Asymtek, www.asymtek.com

Hysol PC62 toluene-free conformal coating is based on the Hysol PC52 platform; is a one-component solvent-based acrylic conformal coating. Is reportedly quick drying. Designed for harsh environments, particularly automotive, military, aerospace, industrial and consumer avionics applications. Is compliant with UL746 and IPC-CC-830 requirements; is suited to application with non-atomized selective spray coating equipment.
 
Henkel, www.henkel.com/electronics

The Quadris-3 quad-gantry model achieves a reported maximum throughput of 95,000 cph by maximizing SW sequences and minimizing delay times between motion sequences. Uses the same software and hardware as the Quadris-S, but with improved ease of use and maintenance. Handles components from 0201 to 44 x 44 mm, in tape and tray feeders including dual-track feeders. Transparent acryl cover on the top and side enhances visibility.

Universal Instruments , www.uic.com

 

The System 855A benchtop rework station’s profiling adjustments include push-button settings for temperature, airflow volume and duration. Unit proceeds automatically through three preheating zones and two reflow zones before auto shutoff. Up to 10 profiles can be stored in the memory. Has temperature range of up to 350°C. Includes external thermocouple on the PCB and an adjustable ceramic underheater. The production cycle begins as a heating nozzle is attached to the head, and then z-lowered onto the component. When reflow is complete, the head is automatically lifted, as solder residue is cleared.

Manncorp, http://www.manncorp.com/specialty-soldering-equipment/855-solder-rework-station/