MX500 fully-modularized AOI, for inspecting solder and lead defects, presence and position, correct part, and polarity for inspection down to 01005 components, is scalable and flexible. Uses a multi-lane approach, featuring a horizontal-stackable conveyor system with a primary master inspection lane that can be coupled with additional lanes to support dual-lane, triple-lane and full-fledged quad-lane configurations. Includes novel inspection sensors for speed and flexibility.
CyberOptics, www.cyberoptics.com
Cone-shaped XS filters are for Panasonic CM402 and CM602 nozzles. Come in packs of 100 and are designed for 100-series, 100S-series, 200-series, 200S-series, 400-series and 1000-series nozzles. Are compatible with Panasonic replacement nozzles for high-speed (8- and 12-nozzle, Type A-0 and A-2) and multifunctional (Type B) placement heads. Function properly with the following Panasonic/KME pick-and-place machines: CM20F, CM301-D, CM301-DU, CM301-DS, DT401, DT401-M, DT401-F, DT400-M, CM401-M, CM401-L, CM402-M, CM402-L, CM400-M, CM212-M, CM232, CM201-D, CM202-D, CM201-DU, CM202-DU, CM201-DH, CM202-DH, CM202-DHU, CM201-DS, CM202-DS, CM202-DK and CM602-L.
Count On Tools Inc., www.cotinc.com
Redesigned Siemens ceramic replacement nozzles offer placement down to 01005 components. Are compatible with Siplace, CS, CF, D1, D2, D3, D4 F5, HM, HS-60, HF, S-27, HM, X2, X3, X4, X4i and SX. Have special vacuum geometry and are ESD-safe. Bodies machined from high-strength plastic. Reportedly will not crack or break under normal working conditions. Come individually or in six-packs in 901, 902, 904, 906 and 925 versions.
Count On Tools Inc., www.cotinc.com
The IPC J-STD-001 Certification Kit now has a Pb-free option. Components are representative of those commonly experienced. Is packaged with enough components to populate the two boards provided. Permits skill development using one board and final assessment with the other. Components and boards also can be purchased individually.
STI Electronics Inc., www.stielectronicsinc.com
Uniflow3 power supply is for resistance soldering, heat sealing and conductive adhesive bonding applications. Replaces Uniflow2 power supply, and features hardware improvements, new process control features, upgraded limit and alarm options, and user interface upgrades. Uses pulsed heat technology; provides targeted heating and precision temperature control for flex circuits, ribbon cables, wires, SMT components, single or dual-sided edge connectors and thermocompression bonding of gold ribbon. Is used in the assembly of medical devices, cellphones, onboard computers, LCD monitors, laptops, and cockpit instrumentation and displays.
Miyachi Unitek, www.miyachiunitek.com
Value Line of low-humidity desiccant cabinets includes three models, with internal capacities of 7, 22 and 44 ft.3. Prevents defects to components and assemblies caused when moisture content becomes vaporized if soldered under high temperatures. Safely stores MSD trays and reels for extended periods in an RH atmosphere of 5% or less. Each of the models provides two or more turbo modules designed to rapidly decline RH to this level without use of nitrogen or compressed air.
Manncorp, www.manncorp.com
Press Releases
- OKI Develops Ultracompact Photonic Integrated Circuit Chip Using Silicon Photonics Technology to Realize Various Optical Sensors
- AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Silicon Valley Expo & Tech Forum
- Occam Strengthens Leadership Team with Addition of PCB Expert Dana Korf
- ITW EAE Expands Partnership with Etek Europe to Represent Despatch Products in the UK and Ireland.