PBT FluxClean T solder pallet cleaning system is fully automated with spray under immersion cleaning technology, spray in air rinsing technology, and closed loop drying with heating up to 230°F. Is PC-controlled; allows for adjustment of all cleaning, rinsing, and drying parameters, as well as storage of up to 99 programs. Is available in different sizes.

EasyBraid, www.easybraidco.com

FH1438AB epoxy potting compound is certified to UL 94-V0. Reportedly provides lower moisture vapor transmission rate than other materials like silicones. Is a two-part epoxy resin system. Has a durometer value of 70 Shore 00; protects surface mount components during a range of temperature cycles. Is formulated to be resistant to age hardening; provides consistent durometer measurement while maintaining resistance to salt water and Fuel C.

HB Fuller, www.hbfuller.com/electronic-materials 

KISS-205 inline automated selective soldering now combines fluxing, preheating and soldering into simultaneous functions, reducing TAKT up to 50%. A PCB is fluxed and brought to preheat temperature, then sent to a second conveyor for soldering while concurrently applying flux and preheating the next PCB. Programmable features set all process parameters, including immersion depths, preheat dwells, travel distances and speeds, solder temperature and wave height. SMEMA-compatible. Offline programmable.

ACE Production Technologies, ace-protech.com

X-eye inline 6200 x-ray inspection system has speeds up to 2.5 sec. per BGA. Is available in 2D and 3D versions.

SEC, www.seceng.co.kr