The ScanExpress JET test tool combines boundary-scan and functional test. Combines common pin and net-level diagnostics using boundary-scan testing with CPU emulation testing through its JTAG port. Provides functional test capabilities on designs using JTAG-compatible CPUs and even non-JTAG peripheral components. Structural tests for opens and shorts reportedly can be performed via boundary-scan, while at-speed functional testing can be performed using the CPU to run test programs loaded into memory. Uses proprietary techniques to test on-board memory at speed without loading code into memory; can test and diagnose faulty boards and systems even when the embedded CPU is not able to boot and board self-test is not operational. Users can access pre-built functional tests or create functional test scripts from scratch to test nonstandard parts.
 
Corelis, www.corelis.com
 
 
 

The VectraES wave soldering system is Pb-free capable and includes the ServoSpray servo-controlled reciprocating spray fluxer, an air atomized spray head, pressurized tank flux supply system, self-cleaning nozzle, and sprays in one or both directions. Also includes preheat technology: low mass forced convection. This one-piece module reportedly minimizes cross-board and top-to-bottom product temperature differentials. Its UltraFill system is said to be 40% wider than traditional SnPb nozzles, and provides increased contact and dwell time. Runs in air or nitrogen configurations. Reportedly improves hole fill, and reduces dross up to 40%.
 
Speedline Technologies, www.speedlinetech.com
 
 
 

Loctite 3508 is a Cornerbond underfill system designed for CSPs and BGAs in Pb-free environments. Benefits reportedly include higher throughput, reduced manufacturing costs and improved pot life. Is a one-component epoxy cornerfill engineered for process optimization with curing taking place during normal Pb-free solder reflow. Said to permit component self-alignment. Is preapplied to the board at the corners of the CSP pad site using a standard dispensing system. Has six-month shelf life, a pot life greater than 75 hours, and can be stored under standard refrigeration. Other advantages reportedly include improved adhesive strength over previous versions and a reworkable feature that enables defective components to be removed. 
 
Henkel Corporation, www.electronics.henkel.com

PADS2007 is said to offer the ability to implement RF and microwave circuitry using automated functionality and perform design for fabrication (DFF) checking early in the design process. Enhancements include high-speed analysis/verification functionality; controls for matched length nets and differential routing improvements; square and chamfered corners; DXF-in import, and via matrixing enhancements for RF design. Designs with partial vias (blind or buried) are automatically updated with the layer pairs and drill count of the partial vias in the design; alpha-numeric pin improvements simplify creation of large BGA-based parts; ECO enhancements include comparison of design rules between the schematic and layout databases. Fabrication checks, such as acid trap, starved thermals, solder mask slivers are checked in the CAD environment and database. Can turn on/off the visibility of the component pin numbers. Integration of DxDesigner and the HyperLynx LineSim tool.

Mentor Graphics Corporation, www.mentor.com