EP62-1MED is a two-component epoxy adhesive system featuring chemical and temperature resistance. Designed to withstand repeated cycles of steam, ethylene oxide, radiation and chemical sterilization.
Cures at moderately elevated temperatures (150° to 200°F) and offers a long working life at room temperatures. Contains no solvents or volatiles and has a 100 to 10 mix ratio by weight.
Said to have bond strength to metals, glass, ceramics, wood and most plastics. Durable and serviceable up to 400°F. Shrinkage upon cure is low (<0.06%). The color of part A is clear and part B is brown. Available in pint, quart, gallon and five-gallon kits. Also available in gun applicators.
Series 150 Vertical Flow Modular Plenum Sections consist of full ceiling, HEPA filter plenum sections that provide filtered laminar flow air to clean areas. Designed to deliver filtered air through 100% of the ceiling’s available surface area.
Available in a number of configurations. Units with blowers on the end are the Series 151. With legs added, these become the Series 551 – a fully functional cleanroom that consists of legs and soft wall vinyl curtains that are mounted to the Series 151 low-profile filter plenum. The low-profile plenum extends beyond the end of the cleanroom. The Series 551 can be building suspended with or without curtains.
Units with blowers on top are the Series 152. With legs added, these become the Series 552. The Series 552 is a building suspended filter plenum. The blower and motor are mounted directly on top of the Series152 filter plenum and blow directly into it. The Series 552 can be supplied with or without soft wall curtains and can also be supported with legs.
The Series 151 and Series 152 are designed to hang from a building, or they may be installed on a custom frame. The Series 551 and Series 552 are designed to be freestanding.
ECV-100 Coolveyor is a cooling fan conveyor used post-reflow; without proper cooling, damage can occur to Flash programming IC and other temperature-sensitive components. Pb-free soldering, in particular, requires a high-temperature process.
Can efficiently reduce the temperature of a board (PCB and components) with a well-insulated unit that uses a cooling compressor to maintain the interior temperature of 5° to 10°C with a fan. Equipped with an anti-static transparent viewing window.
Benefits include room temperature setting, the capability to accommodate PCBs from 50 x 50 to 250 x 330, air is cooled by the cooling unit, insulated case structure unit with viewing window and conveyor speed control of 1 to 2 m/min. Measures 800 x 1,000 x 1,500 and weighs 310 kg. When setting at 5° to 10°C, the temperature of the board surface drops at 2°C/sec.
Adding to its series of recently introduced optimized material sets, Henkel has announced a materials combination designed for stacked CSP (SCSP) devices. Uniting die attach material Hysol QMI536NB with mold compound Hysol GR9820, this material set reportedly delivers JEDEC Level 1/260° reflow performance.
Both materials perform well in Pb-free environments, with a high resistance to elevated temperatures and demanding manufacturing conditions. GR9820 is a versatile epoxy molding compound with adhesion properties that can be optimized for varying leadframe metallizations. The low-stress, “green” mold compound exhibits ultra low warpage in a matrix package format, with the ability to alter the mold compound resin components to counter-correct “smiling face” or “crying face” warpage in a range of package types.
QMI536NB is one-material solution for thin stacked die applications. Traditionally, different die attach materials are used for each of the various layers of a stacked package so as to avoid damage to the die passivation of the first die. This protective and low-bleed formulation can be used for both mother and daughter die, enabling packaging specialists to qualify a single material.
CTS Connect air-actuated internal or external connectors for effective sealing on smooth, rough or threaded circular features of a part create a tight, long-lasting seal. New leak test accessory products include: Digital Vacuum Gauge Portable Leak Finder Digital Vacuum/Pressure Gauge Calibrated Leak/Flow Standards Calibrated Helium Leak Standards
The company will also exhibit the Sentinel M24 and Sentinel C-20. M24 is a compact, multi-station leak test instrument that provides repeatable, high-resolution tests, fast cycle times, a VFD graphic display and an enhanced operator interface.
C-20 pressure decay leak test instrument is a compact device for simple, fast, economical verification of product leak integrity. “Quik Test” feature enables a shorter test cycle time, as much as 80%, by detecting obvious accept or reject parts early in the test cycle.
Cincinnati Test Systems, cincinnati-test.com ATE booth 540
Eunil H.A. Americas has added the PARMI SPI 3-D paste inspection system to its product line. The in-line solder paste inspection system reportedly provides reliable, accurate, 100% inspection at high speeds. Inspects numerous kinds of solder paste defects after screen printing by measuring height, area and volume in conjunction with the system’s fast and accurate 3-D data. Can detect printing faults (volume, height, area, registration, bridge) and monitor the printing process, which helps the operator find the printing status quickly on the line. Uses SPC, providing printing process monitoring and control both on- and off-line. Increases first pass yield by preventing faulty PCBs from going through the next process. Prevents in-circuit test and outdoor failure, provides control of the printing process.