PCB200-Thermal Cycle test board for 15 mm PoP components helps optimize assembly methods that may produce significant thermal gradients across the assembly in the X, Y and Z axes. Helps include a component’s max. temp., ramp rate and solder paste profile. Board size is 132 x 77 mm, 8 layers, 0.039" thick, no microvias; board material is IS-410 high temp. 180 Tg; standard board finish is OSP Entek CU-106A-HT; 15 daisy-chain pad placements for 15 x 15 604 PSvfBGA component; ImAg finish available, and Gerber and X, Y, theta data included.

Practical Components Inc., www.practicalcomponents.com

QX Hawk barcode imager now includes an HX-Mode 3.0 firmware upgrade, more accessory options, and a new CCD version. Combines HUbarcode readingUH with autofocus to read HU1D and 2D barcodesUH in any orientation. Provides improved algorithms for reading direct part marks, additional symbologies such as Aztec Code, Micro QR, Pharmacode, and postal codes, and adds XML for advanced programming. Ethernet/IP protocol support for all standard PLCs, plus integration with latest version of Contrologix is included. CCD version with a 1.2 Mp sensor provides expanded read ranges for decoding tiny 2D and barcode marks, or reading within large areas. Features a high-resolution modular optical zoom system. Uses X-Mode decoding technology to read any barcode mark at distances from 50 to 500 mm and beyond, from a high-density 0.0033" Data Matrix to a large linear code to a low-contrast DPM.

Microscan, www.microscan.com

DVD-74C, ESD Control for Electronics Assembly training video provides a thorough explanation of the effects of shrinking geometries, increased performance requirements and lower operating voltages. Provides an overview of ESD physics, including static electricity generation and triboelectric charging. ESD failure models are covered, as are techniques to control ESD, including personal grounding for seated and standing operations, monitoring wrist straps, controlling static charges in the work area, and proper handling, packaging and transporting of ESD-sensitive devices, in accordance with ANSI/ESD S20.20. Includes paper-based or free online testing with certificates of completion for ISO “verification of training.” Also available in online video format, OVT-74C.

IPC, www.ipc.org/DVD-74C

Spectrum S-930N Series of inline dispensing systems are said to improve throughput and material utilization for selectively jetting low-viscosity flux and phase-change high-tack fluxes. Also coats other materials such as polyimides. In conjunction with special valves, enables flux coatings as low as 5 microns. Is said to provide edge definition of 0.5 to 1 mm, minimize flux residue and overspray, and reduce or eliminates cleaning. Software controls flux jetted to accommodate flip chips of varying bump heights. Reportedly capable of jetting virtually any pattern at high speeds.

Nordson Asymtek, www.asymtek.com