Smart Fan products family offers internal methods to control fan speeds according to ambient temperatures. Fan operation is thermally controlled to meet cooling needs vs. continuous operation. This reportedly enables longer operating life, lower noise and reduced cost of operation. Applications include computers, peripherals, servers, power supplies, workstations and telecom equipment.
 
Offers a variety of sensor technologies provided within the immediate fan housing. These range from thermistors to Hall Effect sensors to Chip-On-Board thermal controller devices. Available for volume requirements in sizes from 40 x 40 x 15 mm to 120 x120 x 38 mm.
 
Has linear ramp control, featuring two temperature set points (no limit). Optional switch function provides programmable temperature-based control for turn-on/turn-off (such as turning off when temperature falls to 35°C, etc.).
 
Options include: Delay Start –enables fans to be hot-swapped or changed without powering down the system; Ramp Start – prevents inrush currents, placing less stress on circuits; Current Limitation and Fan Speed Limitation – fan runs at constant speed while operating at higher-than-rated voltage; Fan Performance Sensor (FPS) - provides preset RPM threshold, delay, non-latching and latching functions to determine fan failures; Pulse Width Modulation (PWM) - Controls fan speed by switching the power on and off very rapidly.
 
Series includes models featuring MagLev technology. Wiring and connector harnessing can be provided for circuitry interface and simple installation. Manufactured in compliance with RoHS Pb-Free materials and processes. MagLev models also feature all-plastic manufacture of major items for insulation resistance and ESD performance.
 
Sunon Inc., sunonusa.com

Cells Product Tracking MES Software provides Lean manufacturing and integrates shop floor processes and critical data with ERP and management information systems. Has a 10-year track record of excellence, targets small- to mid-size manufacturers to increase overall efficiency in all critical areas of production. 
 
Used to track product, collect data, deliver documents and more. 

Manages:  • Routings  • WIP inventory tracking  • Data Collection  • Assemblies and sub-assemblies  • Document Delivery  • Multiple product lines  • Product traceability and history  • SPC Process Control, Reports  • Lot and batch numbers  • Work or sales orders   • Serialize or non-serialized product even manage serialization in mid routing  • Scanned or manually entered barcodes.
 
Unisoft, unisoft-cim.com

MR402 is a high-speed step/repeat electrical tester for high-density double-side and multi-layer circuits. Designed to improve process control and electrical integrity.
 
Available for flexible circuits and thin. rigid boards.  An automatic conveyer system handles thin laminates without damage. Can test circuits with 70 micron pitch pads or traces without special tooling at +/- 5 micron. HDI electrical testing can be a standard in-house process.  No special test pads are required.
 
Can be configured for in-process testing or final electrical verification. Has simultaneous dual side testing and an automatic step and repeat mechanism.  Multifunctional software provides auto positioning with correction retry and pressure control. 
 
Yamaha Fine Technologies Co.Ltd., yamaha.co.jp/finetech/

Visiprise has achieved “Powered by SAP NetWeaver” certification for Visiprise Manufacturing 3.2 and become a “Powered by SAP NetWeaver” partner of SAP AG. This strengthens the collaborative development effort with SAP previously announced in March.

The certification advances the effort between the two companies to bring to market turnkey business software for targeted manufacturing industries. Visiprise intends to offer integrated solutions that combine real-time manufacturing performance management data with Visiprise's manufacturing platform, delivering user information through the manufacturing intelligence dashboard of the mySAP ERP solution.

“Achieving this certification is an important step in our process to create the tightest end-to-end solution between SAP solutions and the shop floor for our customers,” said Carter Johnson, VP of strategy and business development at Visiprise. “The new certified integration allows users to monitor embedded key performance indicators in the SAP manufacturing intelligence dashboard, giving deeper visibility into shop-floor activities.”
 
In May of this year Visiprise Manufacturing earned “Certified for SAP NetWeaver” status.

Visiprise, visiprise.com

Hover-Davis Inc. will display QF Series Fuji Compatible Tape Feeders in booth 2C50 at the upcoming Nepcon South China/EMT South China show on Aug. 30 to Sept. 2 in Shenzhen.

The series is compatible with IP, QP and XP Fuji machines.

Additional benefits reportedly include reliable, electronic, multipitch operation; a lightweight, ergonomic design; low maintenance; and useful diagnostic and maintenance tools. Can accommodate tape widths up to 120 mm, is easily customized for special applications and can handle deep pocket components.

Accessories include:

· Set-up Station for offline loading and operation of feeders; features short-circuit sensing circuitry.

· Label Feeder labels can be placed like components on Fuji machines.

· Calibration Fixture -- A maintenance tool for checking and calibrating pick-point accuracy of feeders.

Hover-Davis Inc., hoverdavis.com

FlexLink will introduce the following products at ATExpo:
DAS 30
DAS 30 (Dynamic Assembly System) is a modular factory concept platform for light assembly, inspection, test, repairing and packing applications. Covers simple assembly lines to highly ergonomic and automated logistic production systems. Combines flow-oriented production control and modular automation with ergonomic manual assembly solutions. Features include a modular reconfigurable construction, production control through RFID technology and dynamic buffering.
 
XK Pallet with RFID Integration
The XK conveyor system features a sturdy design and ample pulling power, allowing heavy work pieces to be transported and accumulated with accuracy even in hostile environments. Offers a range of standard divert/merge devices that enable the design of a pallet conveyor system with main conveyors and satellite conveyors. Capable of carrying loads up to 30 kg/pallet and up to 20 m/min. Offers production control with the integration of RFID technology directly into the pallets. This provides the ability to track and trace products on an individual basis. Drip trays on the conveyor beams are compatible with other drip catcher systems and are available for other divert/merge devices.
 
Automated Adjustable Guide Rail
Automated Adjustable Guide Rail allows products of different sizes to be run on the same line and eliminates the costs associated with resetting systems. Requires no manpower, will adjust to different-sized products in a matter of minutes. Plug-and-play unit offers two different heights and two different widths. There are no restrictions in terms of accessibility. Conveyors can either be made high, low or built-in. Has adjustment range of 34-192 mm/34-363 mm.
 
FlexLink , flexlink.com

RO-CONTROL software combines important functions for process evaluation and process control for reflow ovens. It simulates temperature profiles with different oven settings and enables the comparison with a profile reference from the solder paste library. Controls the reflow oven and assures quality.

The effect of different oven settings to the reflow profile can be studied in advance and parameters can be optimized without tests. The simulation program calculates the reflow profile from the zone temperatures, the conveyor speed and a PCB constant.

The simulated temperature profile can be compared with the guidelines of the solder paste manufacturer. The available solder paste library can be expanded by the user.

The real temperature profile on the PCB can be measured using two optional thermocouples. Measurements are shown graphically. For process analysis profile comparison the antecedent simulated profile and the solder paste reference can be superimposed.

ESSEMTEC AG, essemtec.com

 

 

 

AdVantis XS is designed for the convergence of semiconductor and standard surface-mount assembly, uses VRM linear motors for accuracy and repeatability.
 
Evolved from the company’s GSMxs, delivering accuracies of +/-9 microns at +/- 3 sigma, but with a reported 25% increase in feeder capacity and a 15% speed improvement. Advanced materials engineering and optimized design available at a price 25% lower than its predecessor.
 
Includes high magnification cameras, flip-chip algorithms, low force capability, heated spindles, fluxing, dispensing and a variety of feeder types. Is Class 1000 clean room compatible.
 
Universal Instruments, uic.com

Electronics engineers requiring the condensed system architecture in camera inspection and vision-aided robotics applications but needing the transmission performance available from larger connectors in Camera Link applications can take advantage of Shrunk Delta Ribbon (SDR) Connectors and 0.8 mm Cable Assemblies from 3M Electronics. 
 
Comprised of RoHS-compliant boardmount connectors and a variety of cable assemblies developed to address Camera Link and mini Camera Link (mini CL) interface requirements while offering signal integrity.
 
New connector provides a variety of SDR solutions for Machine Vision and CL applications that require a smaller form factor with high transmission speeds.
 
SDR Connector uses a ribbon contact system with a 0.8 mm contact pitch. SDR low profile, polarized boardmount connectors are constructed of high temperature plastic bodies with 30 micron gold contacts, stamped metal EMI/ESD interface, and come with installed jack sockets and supporting board mounting hardware.  The installed jack socket supports the corresponding assembly thumbscrew interface.
 
Boardmount products are offered in both vertical and right-angle RoHS-compliant PTH and SMT attachments.
 
SDR Cable Assembly consists of rugged, over-mold shells with a thumbscrew locking system.  Come in a variety of MDR/SDR configurations. Uses 28 AWG cable and wiring configurations that meet legacy CL specifications. Available in 30 AWG configuration upon request.
 
 
3M has added two features to its CL assembly offering for both MDR and SDR.  The first is an over-mold, right angle configuration that provides a low profile, thumbscrew interface which reduces the assembly profile by more than four inches compared to traditional straight-exit backshell options. The second is an extender assembly for adding length to existing cables or providing means for bulkhead/mid-span/pass-through requirements. Extender cables feature over-mold MDR receptacles.
 
 
3M Electronics, 3M.com
 
 
 
 

Z-2000 series of flame, furnace and tandem atomic absorption spectrophotometers can accurately determine low concentrations of toxic elements such as cadmium, mercury, lead and hexavalent chromium. This is of increasing importance with the implementation of the Waste 
Electrical and Electronic Equipment Directive and the planned implementation of the Restriction of Hazardous Substances.
 
A new method of sample preparation for polyethylene samples uses high pressure microwave digestion with nitric acid. This replaces traditional extraction methods using sulphuric acid which is not suitable for the measurement of  lead. Details of the new  extraction method can be found in a new technical data sheet. (AA Sheet No. 72) For a copy,  e- mail: info@hitachi-hitec-uk.com.
 
Has polarized Zeeman background correction method on both flame and furnace instruments, for effective background elimination and stable baselines. The dual-beam optics feature twin detectors. Detection limits for the flame instrument (in micrograms/g) are Cd: 2, Pb: 50 and Cr: 
50. For the furnace instrument they are: Cd: 0.01, Pb: 0.25 and Cr:  0.2.
 
Hitachi High-Technologies Corp, hitachi-hitec-uk.com

AirMax VS signal connectors have passed both the RoHS and FCI Lead-Free qualification. While the AirMax VS Guides have always been available only as lead-free parts, the qualification of the signal connectors is the next step in ensuring that the VS family meets the environmental specification.
 
RoHS qualification included testing both receptacles and headers for insertion, retention and repair. The FCI lead-free qualification is an internal six-month test for whisker growth.
 
The test documentation report will be available in approximately three weeks.
 
VS connector system offers high-speed computing and networking designers versatility in structuring their backplane signal routing.
 
VS power connectors are in the process of being RoHS-qualified.
           
FCI, fciconnect.com

Mill-Max now offers a 7” mini reel to accommodate 8 & 12 mm carrier tapes.
 
Offers receptacles (discrete sockets) on carrier tape per EIA-481 to feed automated pick-and-place equipment. A 7” reel holds about one quarter the parts of a 13” reel. Is more economic and convenient for smaller volume customers.

Two types of receptacles are available on carrier tape: surface-mount, flat types, which sit on the    surface of the PCB where the pin or component lead plugs-in parallel to the PCB; and thru-hole types where the lead plugs-in perpendicular to the PCB. Thru-hole receptacles are intrusive reflow soldered.

Thru-hole (tubular) receptacles have an Organic Fibre Plug barrier which prevents solder paste or flux from contaminating the spring contact. After soldering, the barrier is pushed out of the receptacle when the device is plugged in.

Lead free plating options are available. Instead of traditional tin/lead plating on the receptacle’s shell and contact, a pure matte tin with oxide and whisker inhibitors can be specified.
 
Mill-Max Mfg. Corp., mill-max.com