LAS 160 extraction and filtration system features a new filter combination said to significantly increase filtration efficiency. Also has low-noise system operation. Can be equipped with suitable capturing elements, such as hoods or extraction arms, or connected to external systems for automated operation via a D-Sub interface. Removes airborne substances occurring during material processing and marking by means of laser technology.
ULT AG, www.ult.de
Zestron Eye CM full scale concentration management or short CM system provides precise, real-time concentration measurement of the cleaning stage based on Zestron Eye 3P-Technology, as well as closed-loop dosage of cleaning agent concentrate or DI-water. Constantly monitors media concentration and maintains defined concentration level for continuous good cleaning results. Designed as a standalone module, can be integrated within production lines and connected to newly implemented or existing cleaning processes independently of the machine type and manufacturer. 
Zestron, zestron.com
Flexcon SA1000 offers clean removability, performance at temperatures as high as 400°F, and clarity. Can be used to affix films to smooth surfaces and provides consistent, clean, quiet removability. Can be reapplied or used more than one time in some cases. Comes in two VBS product constructions, a 2 mil and a 5 mil clear polyester with a polyester liner for excellent adhesive wet-out.
Flexcon, https://www.flexcon.com
Balver Tip activator is an easy-to-use tool for cleaning oxidized iron soldering tips for SnPb and Pb-free processes. In the simple process, the solder tip is dipped into the solid activator, which becomes liquid and immediately starts removing oxides from the solder tip. After this de-oxidation sequence, the solder tip can be tinned and is ready to create solder joints. Is low smoke and low odor.
Balver Zinn, www.balverzinn.com
CL-100 depaneler for LED boards can handle single-sided, metalized, or FR-4 panels of any length. Uses three sets of round knives positioned at different heights to separate in three sequential steps. Is motor-driven and uses a starting and ending table to lay the panel; operator can feed panel into and through the knives. Table comes in a standard length of 7.8', with 3.5' at the front and 3.5' at the rear. Other length tables are available on request. Can separate boards from 0.8 to 3.5mm in thickness. Max. speed is 400mm/sec. Weighs 45kg.
Fancort Industries, www.fancort.com
xQR41 MicroDot needle valve features a 60% smaller form factor than standard valves, an exchangeable modular design for greater customization and process control, and a quick release clasp. Is 66mm x 23.7mm and enables multiple valves to be mounted closer together. Reportedly ideal for automated assembly processes, the needle valve can dispense in tighter spaces and at more complex angles. Weighs 141.4g and can be fed from a variety of reservoirs, syringe barrels, external cartridges, or tanks. QR clasp secures fluid body to air actuator and can be removed with a turn of a thumbscrew. Applies micro-deposits as small as 150µm of low- to high-viscosity fluids onto a substrate. Can be configured with stroke adjustable or non-adjustable cap, BackPack valve actuator, low-profile mounting block, and 90° air and fluid inlet fittings. Fluid body can be aligned and locked at 360° intervals to accommodate mounting, positioning, and fluid inlet alignment needs.
Nordson EFD, www.nordsonefd.com
Press Releases
- TechSearch International Analyzes Hybrid Bonding Developments and Panel Market Growth
- ECD Doubles Manufacturing Footprint to Meet Demand for SmartDRY Intelligent Dry Storage Systems
- RBB Partners with LogiSync to Enhance In-house Design Capabilities
- Indium Corporation to Showcase Precision Gold Solder Solutions at MEDevice Silicon Valley 2024