SFX-TAP4/CR is the newest member of Scanflex TAP transceivers, developed for integration in Flying Probe Testers (FPT) offering four parallel independent TAP.
This seventh TAP transceiver can be freely combined with all Scanflex controllers on PCI, PXI, USB or LAN basis, with distances up to five meters. Each TAP offers programmable input and output impedance, stepwise (250Hz/1MHz) programmable TCK frequency to 80MHz, programmable delay compensation, read-back of output signals and a relay controlled power signal. This enables an optimal UUT configuration over distances up to 1.5 m. Feature captive CION interface chips (ASIC) and additional safety measures. Features 32 voltage-programmable dynamic I/O, two analog I/O channels, three statistic I/O and trigger lines.
All TAP signals and PIO channels are galvanically isolated from the UUT, and can be tested for operation directly in the system by means of an integrated Built-In-Test (BIT).
The transceiver has a particular slot for coupling with Scanflex I/O modules; or various SFX I/O modules can be connected via an SFX/LS interface.
Supported by software System Cascon from version 4.2.1 on and is compliant with standards IEEE 1149.1, IEEE 1149.4, IEEE 1149.6, IEEE 1532 and JESD71. The software automatically recognizes the transceiver by the AutoDetect Feature.
GÖPEL electronic, www.goepel.com
This seventh TAP transceiver can be freely combined with all Scanflex controllers on PCI, PXI, USB or LAN basis, with distances up to five meters. Each TAP offers programmable input and output impedance, stepwise (250Hz/1MHz) programmable TCK frequency to 80MHz, programmable delay compensation, read-back of output signals and a relay controlled power signal. This enables an optimal UUT configuration over distances up to 1.5 m. Feature captive CION interface chips (ASIC) and additional safety measures. Features 32 voltage-programmable dynamic I/O, two analog I/O channels, three statistic I/O and trigger lines.
All TAP signals and PIO channels are galvanically isolated from the UUT, and can be tested for operation directly in the system by means of an integrated Built-In-Test (BIT).
The transceiver has a particular slot for coupling with Scanflex I/O modules; or various SFX I/O modules can be connected via an SFX/LS interface.
Supported by software System Cascon from version 4.2.1 on and is compliant with standards IEEE 1149.1, IEEE 1149.4, IEEE 1149.6, IEEE 1532 and JESD71. The software automatically recognizes the transceiver by the AutoDetect Feature.
GÖPEL electronic, www.goepel.com
Aegis introduces the "MCAD" system to support box and mechanical product documentation, tracking, quality and materials management. Customers may now support any discrete assembly processes—from circuit boards to full system level assembly—in a single information system.
MCAD functionality is inherently incorporated within the Web-centric manufacturing execution system (MES). Shop-floor operators can step through and drill into iView's existing sequential assembly process feature with intelligent cross-reference to the mechanical components.
MES also supports multi-level assemblies and material setup validation at any work station, and these assemblies are now better depicted in the visual aids.
Features include:
·Support for common mechanical CAD vector file formats;
·Simple digitizing for 2-D capture from a 3-D drawing with the desired user-controlled perspective;
·A mechanical Shape Library permits re-use of commonly used items and components;
·A color-coded parts list display for easy cross-referencing to the drawing.
The module is a cost option available in the upcoming 6.1 release; existing customers have been offered this option at no charge.
Aegis Industrial Software Corp., aiscorp.com
Enhanced Concept 129 Intelli-Drill includes a companion Database and Search Utility. These tools inspect and measure internal layer movement, then assist in using this information to improve process yields.
Database is loaded by the CNC-7 Controller during panel inspection. Search Utility allows the user to search for data and perform statistical analysis. This data is then fed back to the beginning of the PCB design process to improve production process yields
Database can be searched from any networked PC.
Excellon Automation, excellon.com
Booth 2031
Excellon Automation, excellon.com
Booth 2031
Database is loaded by the CNC-7 Controller during panel inspection. Search Utility allows the user to search for data and perform statistical analysis. This data is then fed back to the beginning of the PCB design process to improve production process yields
Database can be searched from any networked PC.
Excellon Automation, excellon.com
Booth 2031
Booth 2031
Wave Surfer is a self-contained measurement system for wave solder machines that provides critical data on wave solder machine setup and its process. As a wave solder machine profile fixture, it has five embedded thermocouples, and works in conjunction with the SlimKIC 2000 for quick and easy profiling and setup.
Made of a material similar to typical wave solder pallets, can withstand thousands of passes. The fixture holds the SlimKIC in place during each run to measure process data including peak temperature, dwell time, parallelism and conveyor speed.
Made of a material similar to typical wave solder pallets, can withstand thousands of passes. The fixture holds the SlimKIC in place during each run to measure process data including peak temperature, dwell time, parallelism and conveyor speed.
KIC, kicthermal.com
Apex booth 363
FX-1R High-speed Chip Shooter is equipped with a double head system driven by two independent linear motors. Both quadruple heads have a multi-nozzle alignment system using a high-resolution laser. This technology simultaneously measures four different components in width, length and height. In-flight measurement eliminates idle time.
Placement rate is 27,000 cph (IPC 9850), component range from 0201s to 11 x 26.5 mm to 20 x 20 mm. Placement accuracy is ±40µm (3 Sigma).
Juki Automation Systems, jas-smt.com
Apex booth 1069
Placement rate is 27,000 cph (IPC 9850), component range from 0201s to 11 x 26.5 mm to 20 x 20 mm. Placement accuracy is ±40µm (3 Sigma).
Juki Automation Systems, jas-smt.com
Apex booth 1069
EnviroMark 907 (EM907) is a no-clean, lead-free solder paste designed for high-yield lead-free manufacturing. Said to offer a long stencil life and Pb-free joints that resemble those achieved with Sn/Pb solder paste. Capable of extended downtimes in printing, maintains print quality at high print speeds — up to 6 in/sec. (150 mm/sec.). Said to have excellent cold and hot slump behavior to prevent bridges and solder ball formation.
Reportedly has excellent solderability to a variety of board surface metallizations, including OSP, Ni/Au, Immersion Sn and Immersion Ag. Features high levels of solderability to a wide array of component metallizations, including Pd/Ag and Alloy 42. Flux chemistry offers bright solder joints, comparable to 63/37, even in air reflow. The paste leaves only a light-colored residue and provides a stable tack life. Reflowable in air or nitrogen, prints down to 0201 pad sites, has printing characteristics to 16 and 20 mil pitches (0.4 and 0.5 mm) and meets J-STD-004 Flux Classification ROL0.
Kester, kester.com
Booth 1085
Reportedly has excellent solderability to a variety of board surface metallizations, including OSP, Ni/Au, Immersion Sn and Immersion Ag. Features high levels of solderability to a wide array of component metallizations, including Pd/Ag and Alloy 42. Flux chemistry offers bright solder joints, comparable to 63/37, even in air reflow. The paste leaves only a light-colored residue and provides a stable tack life. Reflowable in air or nitrogen, prints down to 0201 pad sites, has printing characteristics to 16 and 20 mil pitches (0.4 and 0.5 mm) and meets J-STD-004 Flux Classification ROL0.
Kester, kester.com
Booth 1085
